Cooler Master COSMOS C700M - ARGB Aluminium Case with Dual Curved Glass Doors, Ultra-Modular Frame and Extreme Hardware Capacity - Full Tower

Product Information

But given that this is one of the most expensive PC cases on the market, it ought to be near perfect. A further unusual, if not unique, feature of this case: It's possible to unscrew and rotate the motherboard mounting tray 90 degrees.

Your feelings about them may vary (mine are mixed), but they function as handles and are invaluable for moving this behemoth around. Unless you're a lottery winner or are simply seeking the biggest of everything, a bit of pragmatism might steer you downscale. Each is controlled with a pair of + and - buttons, but each pair is covered by a single shell which is marked in three places, and status is indicated by multiple LEDs that aren’t all labelled clearly.Two hinges affix it to the rear of the case, which makes opening the side easy, while a magnet holds the door closed at front. Load testing is conducted using Prime95 LFFTs and Kombustor “FurMark” stress testing simultaneously. In the lid, however, there are limitations here, because for a 420 mm radiator, the optical drive in the front must be removed. This flight case has been designed to hold and protect the Cooler Master COSMOS C700M PC Tower Case.

In the older model, there was a thin plastic shell that almost completely covered a nice mesh front for no good reason.Testing is completely automated using in-house scripting, and executes with perfect accuracy on every run. In addition to the chimney config, you can also reverse the motherboard tray and have the motherboard face case-right instead of case-left. Type-C ports, headphone and microphone jacks, a hard drive activity LED, a fan control switch, an ARGB lighting controller and a reset and power button. This allows you to install your system's motherboard upside down or rotated by 90°, which would have your GPUs face upward, for example. Additional tests were done without the front panel covering, without any front panel whatsoever, and using the GPU mount with the GPU in the fully vertical position.

Overall, the Cooler Master Cosmos C700M is a sturdy and spacious computer case that allows for ample storage and ventilation options. Ocuk Limited trading as Overclockers UK is a credit broker, not a lender, and is Authorised and Regulated by the Financial Conduct Authority. PayPal Credit and PayPal Pay in 3 are trading names of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH. inch bracket included in the accessories kit along with a generous amount of screws and some zip ties. It throttled down to just under 1700MHz to limit thermals, as opposed to about 1780MHz for the standard torture test.I can't see any reason to remove this panel often, so it would have been better had Cooler Master screwed on this panel instead of connecting it with magnets. It’s actually a big hinged support that attaches to the PSU shroud, and can be folded flat so that the card lies fans-up against the shroud, or folded partially to put the card at an angle. The elegant design of the tower is characterized by two narrow strips consisting of addressable RGB LEDs skillfully accentuated.

This system allows the embedded ARGB lighting to work with the rest of the system without the need for wires. Like the H500M versus the H500P, this is a higher-end and more expensive model being added to a family of cases rather than replacing them. The better your problem and question is described, the easier it is for other Cooler Master owners to provide you with a good answer. It sits behind the metal cover instead of on top, which means you won't see the SSD once the bracket is back in place.

The front door has been fitted with electronic contacts so that you can remove it (and the lights here) without fiddling with cables.