ATOMSTACK A5 Pro Laser Engraver, 40W Laser Engraving Cutting Machine Laser Cutter with Eye Protection Fixed-Focus, 5W-5.5W Output Power, Compressed Spot, Engraving Area 410x400mm

Product Information

Integral screw rod: The machine uses an integrated screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more durable. Fiber Laser Introducing the pioneering World's First 20W High Power 1064nm Pulsed Fiber Laser Engraver designed specifically for Frame Laser Engraving Machines. With remarkable precision, this technology effortlessly achieves a single-pass cut through 0.2mm aluminum and conducts multi-pass cuts on a 0.5mm brass sheet. Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support IOS system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. Support offline engraving: Configure the terminal control panel to support offline engraving you can carry out engraving operations anytime and anywhere without being restricted by the computer.

Vector images are much faster to engrave as the laser head directly follows the lines. You can not make a grayscale image though. We can see that at higher speed there is more wobbling present (mechanical) but the speed shows to have no effect on brightness of the engraved pattern.The dial would be 26mm or 28mm in diameter. There is very small text at the bottom. Would this laser capture all my tiny details? When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Experts in laser technology, leads with first-to-market 5W to 40W laser engraving and cutting machines, continuously leads in developing innovative engraving and cutting solutions. Upgraded version of high-performance fixed-focus laser: Engraving without focal length adjustment; the focus spot area of the new laser is 50% smaller than other ordinary lasers which can take into account both precision engraving and high-energy cutting. At the same time the laser power of the fixed-focus laser is more stable than that of the zoom laser. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.

Blue Laser Modules (455nm) Unparalleled cost-effectiveness makes it an ideal choice for a range of applications, including engraving and cutting various materials such as wood, acrylic, and metal. Use with another product or other damage or loss suffered by the use or combination of any other item. All wood, bamboo, Paper, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective plating and lacquered metalThe text engraving is done at 600 mm/s which is quite fast for such small movements, and therefore some shaking of the laser head is visible in the corners. This can be easily avoided by reducing the acceleration and speed in the settings. Integrated stepper motor and shaft: The machine uses an integral screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the laser movement more precise and the coupling more durable. Lightburn supports more formats: AI, SVG, DXF, PDF, HPGL, PLT, and RD for vector formats and PNG, JPEG, BMP, TIFF, TGA, and GIF for image formats. Cutting material: cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather; Below is the engraving of two sets of squares on the right side, one inside the other. The inner square is engraved with 1000mm/min and the inner square is at 100mm/min.

The interval scale test is here to show if the laser focus spot shape is square or rectangular. The scanning interval is progressively increased from 0.1mm to 0.5mm. New eye protection design: The laser protective cover perfectly protect your eyes,filter UV light for 95%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles. Asian Countries: Singapore, Malaysia, Japan, Thailand, Korea, Philippines, Vietnam, Indonesia and so on

Warranty Policy

You can get millions of free vector designs on the internet, or you can use free vector drawing programs like Inkscape or QCAD (for more technical drawings) Import artwork in a variety of common vector graphic and image formats (including AI, PDF, SVG, DXF, PLT, PNG, JPG, GIF, BMP)

Fixed-focus laser: No need to rotate lens to focus, the focal length of the laser is a fixed value, move the lens up and down close to the surface of the object to start carving. INFRARED LASER (1064nm) Engineered for precision in both metal and plastic engraving, our technology excels across a wide spectrum of applications. Furthermore, it extends its capabilities to non-metallic materials like varnished wood furniture and ABS, showcasing its versatility and effectiveness.

The A5 Pro Laser Engraving Machine Feature:

The most importart part is again the interval scale. By scanning vertically and horizontally with different interval steps we can approximate the laser dot size. From the results we can see that the laser dot is a rectangular, approximately 0.1mm wide and 0.35mm high as with a bigger step, the lines are not touching any more.