BENFEI Active DVI-D to VGA Adapter, DVI-D 24+1 to VGA Male to Female Adapter

Product Information

Like other ways of transmitting video, there are two different regions: the active region, where pixel data is sent, and the control region, where synchronization signals are sent. The active region is encoded using transition-minimized differential signaling, where the control region is encoded with a fixed 8b/10b encoding. As the two schemes yield different 10-bit symbols, a receiver can fully differentiate between active and control regions. Generalized Timing Formula (GTF) is a VESA standard which can easily be calculated with the Linux gtf utility. Coordinated Video Timings-Reduced Blanking (CVT-RB) is a VESA standard which offers reduced horizontal and vertical blanking for non-CRT based displays. [15] Digital data encoding [ edit ] DVI-D single link has the same bandwidth as DVI-I single link, so the maximum resolution is the same at 1920×1200 at 60 Hz. Some DVI-D sources use non-standard extensions to output HDMI signals including audio (e.g. ATI 3000-series and NVIDIA GTX 200-series). [17] Some multimedia displays use a DVI to HDMI adapter to input the HDMI signal with audio. Exact capabilities vary by video card specifications.

You can also convert VGA to DVI because DVI supports analog signals too. Do remember that only DVI-I supports both analog and digital, DVI-D only works with digital, so you’ll need an active adapter to convert that to another type of connector. The DVI connector on a device is given one of three names, depending on which signals it implements: DVI devices manufactured as DVI-I have support for analog connections, and are compatible with the analog VGA interface [1] by including VGA pins, while DVI-D devices are digital-only. This compatibility, along with other advantages, led to its widespread acceptance over competing digital display standards Plug and Display (P&D) and Digital Flat Panel (DFP). [2] Although DVI is predominantly associated with computers, it is sometimes used in other consumer electronics such as television sets and DVD players.High-Definition Multimedia Interface (HDMI), a forward-compatible standard that also includes digital audio transmission Unified Display Interface (UDI) was proposed by Intel to replace both DVI and HDMI, but was deprecated in favor of DisplayPort. To promote interoperability between DVI-D and HDMI devices, HDMI source components and displays support DVI-D signalling. For example, an HDMI display can be driven by a DVI-D source because HDMI and DVI-D both define an overlapping minimum set of supported resolutions and frame buffer formats. An earlier attempt to promulgate an updated standard to the analog VGA connector was made by the Video Electronics Standards Association (VESA) in 1994 and 1995, with the Enhanced Video Connector (EVC), which was intended to consolidate cables between the computer and monitor. [3] [4] EVC used a 35-pin Molex MicroCross connector and carried analog video (input and output), analog stereo audio (input and output), and data (via USB and FireWire). At the same time, with the increasing availability of digital flat-panel displays, the priority shifted to digital video transmission, which would remove the extra analog/digital conversion steps required for VGA and EVC; [5] :5–6 the EVC connector was reused by VESA, [6] which released the P&D standard in 1997. [3] P&D offered single-link TMDS digital video with, as an option, analog video output and data (USB and FireWire), using a 35-pin MicroCross connector similar to EVC; the analog audio and video input lines from EVC were repurposed to carry digital video for P&D. [5] :4 [7] :§1.3.3 One of the purposes of DVI stream encoding is to provide a DC-balanced output that reduces decoding errors. This goal is achieved by using 10-bit symbols for 8-bit or less characters and using the extra bits for the DC balancing.

So you can use it to connect to a secondary old monitor or TV that only has DVI or VGA inputs. The output resolution will be good enough for documents and watching movies but it won’t be true-HD and I definitely do not recommend it for games. To ensure a basic level of interoperability, DVI compliant devices are required to support one baseline display mode, "low pixel format" (640×480 at 60Hz). In December 2010, Intel, AMD, and several computer and display manufacturers announced they would stop supporting DVI-I, VGA and LVDS-technologies from 2013/2015, and instead speed up adoption of DisplayPort and HDMI. [18] [19] They also stated: "Legacy interfaces such as VGA, DVI and LVDS have not kept pace, and newer standards such as DisplayPort and HDMI clearly provide the best connectivity options moving forward. In our opinion, DisplayPort 1.2 is the future interface for PC monitors, along with HDMI 1.4a for TV connectivity". Female M1-DA connector pins (view of plug) DVI port on a Sony HD CRT TV that complies with EIA-861 DVI output connector on a computer When DVI was designed, most computer monitors were still of the cathode ray tube type that require analog video synchronization signals. The timing of the digital synchronization signals matches the equivalent analog ones, so the process of transforming DVI to and from an analog signal does not require extra (high-speed) memory, expensive at the time.

Uses for DVI

DVI stands for Digital Audio Interface and it was an attempt to create an industry standard for video connectors, a seat which HDMI has now filled. The technology is a little dated, but like VGA, it’s still common on computers, monitors, TVs, and other displays. DVI's digital video transmission format is based on panelLink, a serial format developed by Silicon Image that utilizes a high-speed serial link called transition minimized differential signaling (TMDS). If a depth greater than 24 bits per pixel is desired, the least significant bits are sent on the second link. a b c Digital Visual Interface & TMDS Extensions (PDF) (Report). Silicon Image. October 2004 . Retrieved 31 January 2023.

Intel Newsrom – Leading PC Companies Move to All Digital Display Technology, Phasing out Analog (8. December 2010)The DVI specification includes signaling for reducing power consumption. Similar to the analog VESA display power management signaling (DPMS) standard, a connected device can turn a monitor off when the connected device is powered down, or programmatically if the display controller of the device supports it. Devices with this capability can also attain Energy Star certification.