About this deal
Based on my car stereo installation experience, I’ve seen many cases where a lack of bass response when a cheap ground loop breaker was used. Ground Loop Isolator Noise Filter for Car Audio/Home Stereo,2 PCS Ground Loop Noise Isolator with 3. Most are easy to use by plugging the RCA connectors inline with RCA cables and then to the amplifier. PLUG AND PLAY】 Plugged this ground loop isolator directly into the cars/speakers AUX port, then the aux cable into the audio source.
I understand that a switch for lifting the ground on one side could be enough, but I want to find a solution that doesn't need a manual switch. But if you’re noticing odd noises that seem to be in time with the bass or vibrations, give the signal cables a hard tap with a finger (with the equipment powered on) to see if this is a problem.I also had a different amp in place at one point in this system, and I did not have any noise like I do with the Carver. Their head, or maybe one time head as he now also has THAT Corporation, Bill Whitlock, is one of the world’s foremost experts on ground loops and Common Mode noise in systems. If your speakers are making a humming or buzzing noise then you quite likely have a ground loop issue. Plugged this audio noise filter up and it instantly took the buzz/hum/static out of your car audio system/radio/home stereo/speakers. It’s a bit like output transformers in old valve amps, the quality of which largely defined the quality of the amplifier.
This power board is then plugged into an outlet on my first power board, which all my NAim equipment is connected to.If you need other stage and studio audio tools, see our range of DI boxes and peripheral audio equipment . You can get them cheaper, but the cheap ones add distortion artifacts, especially at lower frequencies as the core saturates easily.