eco-filtration 50MM THREADED TANK CONNECTOR KOI FISH PUMP FILTER PIPE FITTING

Product Information

PVC is light to handle and can be easily jointed with a simple set of tools, PVC solvent cement and accessories. PVC fittings are manufactured in accordance with the following standards – WRAS, BS-EN1452, BS4346-1, ISO9001 and ISO14001. A pressure pipe fitting that provides excellent chemical resistance to most solutions of acids, alkalis and salts and solvents that can be mixed with water. Threaded Tank Connectors are quick and easy to use; making them perfect for any job, great for inlet/outlet ports between chambers or rigid pipe/fittings that need to be secured to the surface. Black Waste Threaded Tank Connectors are unique in that they accept the same size Solvent Weld Pipe on either side of the fitting.

The Flange Extension Kit consists of 6 stainless steel bolts, locking nuts, and 12 stainless steel washers. Slacken the compression nut on the dry side of the fitting until you can see roughly half of the threaded section it hides – then – after inserting the correct size pipe liner into your MDPE length, push the pipe into place – in the middle of the nut, the split ring, and the o-ring.These companies may track your browsing across multiple devices, and combine your browsing on multiple devices into a single profile that is used to deliver relevant adverts to you on all of those devices. This warranty and the standard manufacturer’s warranty does not cover general wear and tear, abuse or misuse or incorrect installation. The flange tank connector has been designed like a socket/joining bush, allowing for the ridged pipe to be solvent welded on either side of the connector.

we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the rite pipe work for your project. It is suitable for domestic repair maintenance and improvement work making it suitable for domestic and industrial applications. Please Note: Due to the design, these tank connectors reduce the diameter in the centre of the connector. These Elbows/Bends are great for joining two sections of pipe at a 45 Degree angle with limited friction loss.Threaded Tank Connectors provide a secure, watertight way to connect Solvent Weld Pipework through the side wall of a filter box or water tank. Please see note below on tank connector internal diameter sizes and recommended hole drill size range. Black Waste 90 Degree Bends should be used in conjunction with Black Waste Solvent Weld PVC pipework.