Fujifilm NP-W126S Lithium-Ion Battery for X-Pro1, X-E1, X-M1, X-A1

Product Information

However I understand different approach (it's safer for sure), there's a lot of devices with non-removable batteries which don't swell too often (Two years ago I had such a case with my company laptop). Recommended for X-T2 in conjunction with the Vertical Power Booster Grip to allow 30min of 4K movie recording (requires 2 batteries).

This battery is also compatible with older cameras that use the NP-W126 battery pack, but users will not see any performance advantages in those bodies. While the indicator isn’t too useful for the original batteries, it’s next to useless for other batteries, where the in-camera indicator shows full battery for roughly 90% of the battery capacity! In-depth testing Latest Camera Reviews Beyond the studio tests Feature Articles and Videos see how we see Sample Galleries real world performance Field Test Videos Throwback Thursday Classic Cameras from Days Past What's that Noise? We've been using a full production version of this 120 fps sports camera, to see what you gain (and, perhaps, lose). London Camera Exchange Limited, London Camera Exchange Solent Limited and London Camera Exchange Portsmouth Limited are authorised and regulated by the Financial Conduct Authority, register numbers 742719, 761264, 789602 and act as a credit broker and not a lender.

MPB Europe Ltd acts as a broker and offers credit solely from PayPal Credit, a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH. Even though you opted to respond to the least important part of the topic , you did provide some interesting points. Keep your supported camera going and capture more photos by having the Jupio NP-W126s Battery Fuji as a spare.

I also used my thermal camera, Flir One for Android ( iOS version exists too), to capture batteries after a heavy load. The NP-W126S is supposed to be thermally more efficient and thus able to better handle substantial loads. also I never keep batteries inside cameras while not shooting - they are in the separate drawer, and when I go for a shooting day, I take them out, inspect for swelling, for drains, for cleanliness of contacts, than charge again, and I insert batteries inside my cameras only right before shooting start. Only the batteries with the lowest capacities don’t perform that well in this test — while DSTE was only about 4-5 degrees warmer, the noname brand started swelling, probably due to higher power load of the camera making 4K recording. So if the charger has only 2 contacts, it is probably dumb and don't communicate with a chip inside the battery, so I'd avoid this one.I think this also means that the charger is unable to communicate with the control microchip inside the battery (if any present, like laptop batteries all have it long since) so not only a thermistor may matter. The Fujifilm XF 23mm F2 R WR delivers a 35mm full-frame equivalent field of view and stands out due to its small size and weather-resistant build.

Watson and Green Extreme have performance pretty much on par with the original batteries and cost roughly a third of them. Now, in very, very special occasions (think going off the grid for a few days), I might add a third one, just in case, but as I usually have both the charger and a power bank with me as well, I can easily recharge depleted battery in the meantime (even on the go), so the third one will most probably not be required. Lower quality batteries can show more significant aging, the DSTE battery is already almost unusable.Recommended for X-T2 in conjunction with the Vertical Power Booster Grip to allow 30min of 4K movie recording. My old original NP-W126 currently, after several years of usage, has roughly 1100 mAh, while it had >1200 mAh when new. Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade.