LimbSaver Grind-to-Fit Recoil Pad

Product Information

To try to make the gun as user friendly as possible, I wanted to put a LimbSaver recoil pad on but all were way too big. The recoil can certainly be tolerated, but on the red letter days a reduction in recoil would be great. If you are the kind of guy that wants it 100% perfect looking, I'd go to a gunsmith that has experience with installing them.

The problem with other recoil pads is they don't absorb enough recoil or they slip off and cause a hazard. was going down the adjustable route but thinking it may look a bit bulky now, hence looking at other options. Since 1991, we have endeavored to design and manufacture industry-leading products that set the bar in terms of precision, performance, and reliability. The set includes swivels that can fit either 1" or 1¼" wide slings and are available with or without mounting studs. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.As well as producing a lot of rubber/Sorbothane dust the disk itself clogs up badly and I use a dressing block to remove this build up.

Before you shout, yes the gap between table and disk is wider than it should be and this is deliberate and allows the ground away material to be sucked down into the extraction port. Our range of Grind-to-fit pads vary from the Cervellati range to the ever popular Kick-Eez recoil pads.If you wish to do this job yourself I recommend aiming for the same or with the pad being very slightly larger than the pad so you can always finish it with a sanding block and in the absence of a sanding block use some 220 grit Aluminium Oxide paper wrapped around a piece of wood.

If for some reason parcels are required to be redirected then an additional charge might be levied (where applicable). Established in 1989 and incorporated in 2000, with years of experience in the gun trade, we are able to offer the highest standard of service available.

Lucas Extreme Duty Gun Oil is a high-performance lubricant designed for high volume, high heat firearms, including full auto and semi-auto weapons, and offers superior heat and burn-off resistance. The reduction in felt recoil from this product is evident as you can see in our comparison graph, with the cyan (light blue) versus the brown which is the level of vibration of a competitor product or without's LimbSaver's product. so I think they are quite a narrow fit but length way's are a good fit so if you have wide feet may be go for the next size up . version features an opening for built-in swivel stud access, improved construction, and trim around all raw edges for excellent style. The GRIND-TO-FIT PADS LIMBSAVER GRIND LARGE is a recoil pad made from space-age NAVCOM™ polymer that helps reduce shoulder bruising and recoil pain.

Using the amazing technology of Sorbothane, nothing comes close to the materials effectiveness in a custom recoil pad. The oil contains a unique additive that prevents it from running, protects against rust, wear, and moisture, and helps reduce fouling from carbon, lead, and copper. Time to attach and mark the pad, probably the most awkward part is marking the vertical centre line and I check this a couple of times before marking with a sharp wax pencil, once done I can locate the pad in place and mark the top hole with a correctly sized transfer punch. If your shotgun shooting accuracy suffers due to improper gun fit or you need help getting up to the cross-hairs on your rifle’s high powered scope, you have found the solution.before - but that is not putting me off as recommendation is generally everything and the man that developed it has all the correct credentials. Thanks to its cutting-edge technology, our Speed-Mount Grind-to-fit Recoil Pad reduces up to 70% of felt recoil, making your shooting experience more comfortable and enjoyable than ever before.