SYLJ Ultra Heavy Duty Drawer Slides, 1000-2000 MM 3 Folds Full Extension Ball Bearing Locking Rails Glides, 180KG Bearing Capacity, 20.5mm Wide, 76mm High - 1 Pair (Size : 60in(150cm))

Product Information

If your drawer is slightly longer than the length of the drawer slides, I recommend attaching the slides as close to the front of the drawer as possible. This is a very strong compact slide, utilising the I beam format, which offers high resistance against axial and coaxial torque loading. To withstand such a high level of repetitions, the ball bearings and the associated ball track tracks need to be hardened to resist pitting and corrosion.

Sliding Systems engineers have the experience to guide you through the selection process of choosing the right telescopic slide, linear rail or tilting drawer system. Most heavy-duty side mount drawer slides will need at least 1/2 to 17/32 inches on either side, and each drawer should be 1 to 1-1/16 inches smaller than the opening to fit. Our Front Handle Locking System has been developed to work with the Professional Range as a positive, rugged means of securing the drawer.High load bearing，long life】 Heavy duty drawer runners have a thickness of 25mm, High density, High strength，Load Capacity 180 Kg. You must decide for yourself whether it is easy for your application to point the handles downwards or upwards.

If you don't know which size will fit, please measure the length of the drawer without the drawer frame board,And if the length is not even, please choose 1 inch shorter.These drawer runners are designed to provide support and stability for heavy loads, ensuring that your drawers are secure and easy to access. This method of manufacture is far superior to other processes where slides are made from rolled or drawn ‘C’ sections which are liable to failure on extreme applications. The mechanisms work by attaching the two mating slide pieces to the drawer, which allows the drawer to slide or rest on the cabinet.

You screw the remaining horizontal lips of the corner lines onto the bottom, so that the drawer guides are at right angles to the bottom. If you opt for the latter, make sure to use a thread diameter of up to 5mm so that the countersunk head partly fits into the hole. This means you don’t have to push one lever up and one down to open the drawer, but both locks point in the same direction.Components require a high resistance to localised wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations. Made from aluminium, steel or stainless steel, our solutions are available in a range of extensions and load capacities to suit this application. We are a privately-owned company, established over 30 years and our slides and tool mounts cover every possible application within the catering and hospitality industry.