Joined in 2023 
82 
63 About this deal
The chassis is aluminum, so it’s rugged yet lightweight, and it looks great, too. This is the ultimate hub for anyone who wants to connect several devices or transfer data from multiple USB sources simultaneously. It's worth noting that when plugged into a computer, there is some connection latency for the higher-count ports. But the first four ports are fast and responsive. Take some of the claims made by some manufacturers with a pinch of salt. We tested a couple of hubs that promised high-end features but failed to deliver during testing. For example, they might promise 4K at 60Hz, but you might find that this only works on specific laptops and displays.
All MacBooks and many of the best Ultrabooks come with only USB-C ports, and just a couple of them. That’s why there are so many portable USB hubs that connect to a computer via a built-in USB-C cable and then provide a few Type-A ports, along with some extra goodies such as an HDMI out or a card reader. Anker’s PowerExpand 4-in-1 USB-C hub has one whiz-bang feature we haven’t seen anywhere else, and that’s a built-in 256GB SSD. Upstream connection (Type-A or Type-C?): USB hubs have multiple downstream ports to connect to your devices but only one upstream connector, which could be a port but is often a built-in wire that connects to your computer. Many laptops, including a lot of the best Ultrabooks, only have USB-C ports, so your hub's upstream connector would have to be Type-C.Powered or not? Some USB hubs come with their own AC adapters so that they can provide more power than your computer delivers from one of its ports. Bus power from your computer can be pretty low, not enough to juice several power-hungry peripherals at once or to charge devices at a reasonable rate. By definition, a USB hub that needs its own plug isn’t very portable. Ethernet is easier, as it’s hard to find a hub that doesn’t support Gigabit Ethernet speeds. That said, a small number now support the faster 2.5 Gigabit (2.5GbE) standard, which isn’t a priority for most home networks, but a plus for advanced users or just for future proofing. The hub supports fast data transfers up to 5Gbps for expanding USB ports or connecting multiple devices. It also has USB on the go and simultaneous transfers across all ports. It’s plug-and-play, and no extra drivers are needed for PC, Mac, or select versions of Linux (2.6.14 or later). An integrated safety chip offers overcurrent, overcharge, overvoltage, overheat, and short-circuit protection for both the hub and any connected devices. This UGreen unit is another basic USB hub, with four USB 3.0/3.1 Gen 1 ports connecting through a single USB-A connection. Disappointingly, what looks like an aluminium casing turns out to be plastic, which feels a little creaky in comparison to some models, but it’s robust enough for daily desktop or mobile use. The big advantage this one has over similarly priced rivals is a 5V micro-USB input, meaning it can charge devices while in use (without any fast charge support) and run one or more USB SSDs or HDDs – we tried it with one of each without any issues. The only downside? You’ll need to supply your own charger and cable, but it’s hard to grumble at this price. This beast is almost 9 inches long and weighs 1.8 pounds. Every port has a power switch and a bright blue LED indicator. You can turn ports on and off individually, and the light will tell you what’s powered and in use. It’s plug-and-play compatible with PC, Mac, and Linux systems. It has a built-in surge protector to keep all your devices and the hub safe and secure from electrical failures.
Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD. I have been using the Sabrent HB-BUP7, the nearly-identical 7-port sibling to the HB-B7C3, as my daily driver for more than a year, and having these buttons is a real game changer. Changing default audio devices in Windows is a royal pain, requiring one to go into the control panel to, for example, make sound come out of your headset instead of your speakers. But with the power switches, I just turn off my USB speaker and turn on the wireless headphone dongle, or vice versa. You can also get other versions of Inatek's USB hub, the HB2025 for example, that connect to your computer via USB-C, which is a more common interface for 10 Gbps connections, particularly on laptops. We really wish one of these hubs had a mix of USB-C and USB Type-A downstream ports, but they are all Type-A downstream.
The best USB hubs you can buy in 2023
We also connected an Android phone to the ports and recorded how many volts and amps it received. The phone charging test was probably the most realistic as it showed what kind of volts and amps a real device would negotiate with the hub. Anyone who works with microcontrollers such as the Raspberry Pi Pico or any Arduino board knows that most of these devices don't have on / off switches or even reset buttons. So, if you change code and need to restart them or you just want to power them off, you often need to yank the plug in and out, a huge hassle that could damage your gear. But with the Sabrent HB-B7C3, you can just toggle power on whatever port your microcontroller is plugged into. If the number of ports is your biggest concern, the Acasis 16-port USB hub is one of the biggest. All 16 ports are USB 3.0, and they all support fast charging up to 2.1A and data transfers up to 5Gbps. There are no compromises, no ports left behind—just full functionality across the entire unit. There are also seven- and ten-port variants if you want something slightly smaller.
The TS3 Plus allows you to maximize the capabilities of a Thunderbolt 3 connection. It features two Thunderbolt 3 ports, one DisplayPort 1.2 port, five USB 3.1 Type-A ports, two USB 3.1 Type-C ports, an SD Card Reader (SD 4.0 UHS-II), a Digital Optical Audio (S/PDIF) port 1x Gigabit, Ethernet, an Analog Audio In, and an Analog Audio Out port. At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once.In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried). Speed: Most USB hubs operate at standard USB 3.0 (aka USB 3.2 Gen 1) speeds of 5 Gbps. However, a few can deliver 10 Gbps. There are also some cheapies that are limited to USB 2; avoid those at all costs.
Great Deal 
New Comment