Hikvision DS-7608NI-K2/8P network video recorder

Product Information

There are currently 2 main choices for Hikvision systems with up to 8 cameras: DS-7608NI-K2/8P or DS-7608NI-I2/8P. The DS-7608NI-K2/8P is a -K series NVR and was designed to be a "middle level" product while the DS-7608NI-I2/8P is from the -I series and serves as a "top level" product. In 2015 the Hikvision DS-7608NI-E2-8P , which served as the entry level NVR, was made end of life leaving the -K series and -I series NVRs as the only choices on the market. Network Protocol TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS

So there would be a lot of things that could be done to improve this from my PC silencing experience, and I would have liked to have done with more time and energy, but I was in a hurry to shut the thing up. But if you're doing something similar, you might want to consider... Recording Resolution 32 MP/24 MP/12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA /4CIF/DCIF/ 2CIF/CIF/QCIF After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24 MP IP video inputs. The vast majority of CUCCTV deliveries are received without incident, however if you should incur problems please notify us within 2 working days to allow us to help. Insurance is included in our delivery prices and you will be asked to sign for your goods upon delivery.Below we'll take a look more closely at the key features and specification. I'll highlight the main differences. You can look at our article about the New Version 4 Firmware for Hikvision NVRs if you'd like more information. Like many other threads on here, I found my new DS-7608NI-K2-8P unbearably loud. It has a channel well technologies PSU (KSA-180S2) with a 12v 5A rail, a 52v 2.5A rail and a really noisy 40mm fan, and then a second not-quite-as-noisy 40mm fan on the case. HDMI Output 4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz

The -K and -I series are relatively similar in spec so it can be hard for users to decide which unit is best for their system. In this article we'll hopefully make the decision easier and cover the main differences focusing on:

Hikvision

By Device 2-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarm Cutting a hole for the fan (especially if you had a second hard drive so couldn't use the existing vents) might be good. There is lots of room when the power supply comes out to do this in either the lid or the base. There are enough holes in the base for this to work fine without if you don't need the second drive, but a nicer hole, a fan gasket and some fan mesh would be better. Cutting neat holes in aluminium isn't straight forward at home, so a fit from the outside fan mesh which covers your work is a nice thing.

Recording Resolution - The resolution of a camera tells us how many million pixels will be in it's images. 8MP = 8 million and 12MP = 12 million. Currently, the highest resolution available in Hikvision's most recent range is 8MP. This is really high quality and pretty much the best consumers can get on the market for a CCTV system. Decoding Capability AI on: 1-ch@12 MP (30 fps)/2-ch@8 MP (30 fps)/4-ch@4 MP (30 fps)/8-ch@1080p (30 fps) I used a little (just what I had lying about spare) on the case above the hard drive. This stuff is always over-hyped, it's not going to make a big difference on it's own. But I do find it helps in improving the overall quality of the noise, even if the total volume is about the same. If you were going for a thorough solution I'd cover the whole of the case roof and any exposed large surfaces of the floor.Face Picture Library Up to 16 face picture libraries, with up to 20,000 face pictures in total (each picture ≤ 4 MB, total capacity ≤ 1 GB)