Evolution Power Tools 067-0001 FURY6 210 mm TCT Multipurpose Table/Mitre Saw,Silver/Green

Product Information

If the table insert becomes damaged or worn it must be replaced with an identical one available from the manufacturer Utilising patented professional RAGE® technology; easily cuts Steel, Aluminium, Wood (even wood with nails) and Plastic, using just one blade! Features a hi-torque gearbox, which reduces motor stresses, improving performance and durability. WARNING: Do not use the blade guard as a ‘lifting point’. The power cord must be removed from the power supply before attempting to move the machine.

Most mitre saws include integrated clamps to hold down your material, ensuring you can use them safely without having to put your hands near the blade. When cutting long lengths of timber, these may not be strong enough to keep your timber balanced and your cut accurate, so consider investing in extra clamps or having an extra pair of hands help out when cutting. Position the Auxiliary Lower Blade Guard on the RotaryTable over the table insert and straddling the Fence. (Fig. 16) Under no circumstances shall a saw blade be used that is marked with a speed that is less than the no load speed marked WARNING: Only use genuine Evolution blades which are designed for use in this machine. Ensure that the maximum speed of the blade is compatible with the machine. Only perform this operation with the machine disconnected from the mains supply. EvoSystem EVO200 6.5hp Engine Unit / EvoSystem GT600 6hp Engine Unit - Product Code: EVOSYSENG / EVOSYSENGMIT

Evolution Build Products

Multi-Material Cutting: No more need for multiple saws. With the FURY6’s multi-material cutting technology, one blade suffices for a range of materials. From wood to metal*, achieve clean, precise cuts with ease.

WARNING: Before making any adjustments ensure that the machine is disconnected from the power supply. Evolution Power Tools reserves the right to optionally repair or replace it with the same or equivalent item. Respiratory protection is also advised as some wood and wood type products especially MDF (Medium Density Fibreboard) can produce dust that can be hazardous to your health. regelmässig benutzen, müssen den Zustand ihrer Hände und Finger sorgfältig im Auge behalten. Sollte eines dieser Symptome auftreten, muss sofort ärztlicher Rat eingeholt werden. The measurement and assessment of human exposure to hand-transmitted vibration in the workplace is given in: BS EN ISO 5349-1:2001 andRAGE5 255mm Multipurpose Table Saw - Product Code: RAGE52551 (110v) / RAGE52552 (230v) 2 Year Warranty Items Advanced performance; out performs normal saws. When cutting Steel (only in Mitre mode), it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks. Before attempting a cut, make a‘dry run’with the power off so that you can see the path of the blade. Note: A workshop dust extraction device can be connected to the extraction port found at the rear of the machine if required. General Power Tool Safety Warnings [Power tool use and care]. a) Do not force the power tool. Use the correct power tool for your application.

Position the saw so other people cannot stand behind it. Thrown debris could injure people in its path. We recommend the use of an approved face mask with replaceable filters when using this machine in addition to using the dust extraction facility. Note: The left hand side of the fence is provided with additional adjustments. The upper portion of the fence can slide to the left to provide clearance for the blade. This may be necessary when acute bevel angles are selected.Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Note: The Stabilising Arms are fitted with rubber feet. The base of the Fury6 is also fitted with four (4) identical rubber feet positioned underneath the mounting holes in the base. Durability: With a die-cast aluminium base, the FURY6 is built to withstand the rigours of both DIY and professional tasks. a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Ensure that the Cutting Head is tilted to the 45˚ position, against its stop, with the Bevel Pointer indicating 45˚ Bevel Angle.

To adjust the Riving Knife loosen the two (2) fixing screws (Fig. 27) slightly using an allen key. When correct alignment is achieved tighten the fixing screws. of the retractable guard and its operating mechanism ensuring that there is no damage, and that all moving parts operate EnsurethattheCuttingHeadisintheverticalposition,againstits stop with the Bevel Pointer indicating 0˚ Bevel Angle.WARNING: The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used. The need to identify safety measures and to protect the operator are based on an estimation of exposure in the actual conditions of use The height of the Table above the machines motor can be adjusted. This enables your Fury6 to mimic the rise and fall facility found on many conventional table saws. The cutting depth of the blade can thereby be adjusted from 0mm to 32mm. Note: The Cutting Head will need to be tilted to gain access to the 0˚ Bevel Stop Adjustment Screw. Of course, Makita is a mid-to-premium range, so it has some brilliant features too, including the laser guide and dual-mitre head, meaning you can cut mitres on both sides of the blade. The ball-bearing rail mechanism also promises a smooth, precision cut when using the sliding function.