Joined in 2023 
82 
63 About this deal
When it comes to vibration emission, the Bosch GCM 8 SJL produces 2.5 m/s², which is within acceptable limits for most users. However, it is important to note that there is an uncertainty K factor of 1.5 m/s², which should be considered for more accurate assessments of vibration levels. In terms of its physical characteristics, the Bosch GCM 8 SJL weighs 17300 g, which may be considered relatively heavy compared to other saws on the market. It has dimensions of 910 mm in depth, 410 mm in height, and 460 mm in width, allowing for easy maneuverability and storage. What I will say about this saw is the quality of the materials used to construct it. The heavy gauge machined aluminium parts that make up the saw bed and extending table feel well made. The mechanisms for the mitre, bevel and slide-out rails are extremely solid.
It’s clear from the first glance that the Bosch Professional GCM8SJL is a solid and well-engineered mitre saw. The machining marks on the table, fence, and other components let you know that straight away. Bosch haven’t used as many cheap die-cast components on this saw. It’s stronger, straighter, and more reliable that way. Bosch integrated soft-start module provides smooth start-up and reduces chance of blowing circuit fuse at start-up and when used on long extension cables or transformers. The GCM8SJL has an improved dust management system that helps keep the area dust free and a nicer place to work with a two point dust extraction system. One of the dust collection points follows the blade, ensuring that dust is collected even on the widest of cuts. When a saw like this is working constantly there will be a lot of dust generated which needs to be managed and not end up being a hazard. Designed to cope with large bits of timber; this saw features a massive sliding saw arm, extendable table sections, and dual-zone dust extraction. It’s a big, heavy beast, but will it perform as good as it looks? I’m going to put it to the test to find out.There are many different uses for the saw, here are a couple of common jobs that it may be used for to give you an idea of the work it can take on.
To adjust the laser when the saw blade and the laser are not aligned on the Bosch GCM 8 SJL saw, follow these steps: The mitre angles that can be set on this saw are a step up from the PCM 8 S, allowing a 52 degree angle on the left setting and a whopping 60 degree angle on the right setting. This will allow some very tight angles to be cut. The motor will also give your saw plenty of reserve power for stubborn materials that might leave a less powerful motor struggling.Even the best chop saw on my list comes with a long list of safety precautions to take before it’s good to use. Following the guidelines in the weighty instruction manual are essential to help avoid injury, and I’m glad they’re well laid out and studded with helpful diagrams. Cutting through the CLS I tested with was as I expected. The Bosch GCM8SJL made short work of even compound cuts that might have stressed a smaller chop saw. The big motor didn’t struggle at all with the cuts, and it felt comfortable throughout. Turn on the laser using the switch. The laser should be aligned with the cutting line on the workpiece along its entire length, even when the tool arm is guided downward. Noise level - The A-rated noise level of the power tool is typically as follows: Sound pressure level 99 dB(A); Sound power level 112 dB(A). Uncertainty K= 3 dB.
The Bosch GCM8SJL has much improved dust management and a greater horizontal and vertical cutting capacity of its predecessor. The 312mm horizontal cutting capacity makes the saw extremely versatile and ideal for many applications. The built in laser line can be used for accurate efficient work. Supplied with a 24 tooth wood cutting blade. Less weight, less dust, more performance: the compact GCM 8 SJL Professional offers cleaner solutions when it comes to cutting through large workpieces. Its cutting capacity of 70 mm vertical and 312 mm horizontal makes it ideal for sawing large workpieces. With a 2-point dust extraction system, the mitre saw provides optimised dust management, allowing for a clean work area during operation. It has a light, compact and design. Turn on the laser using the switch. The laser should align with the cutting line on the workpiece along its entire length, even when the tool arm is guided downwards.Ensure that the tool is connected to the power supply but do not activate the on/off switch while adjusting the laser. This mitre saw offers a very powerful cut, giving very clean and accurate angles. The 1600 watt motor allows this saw to glide smoothly through large pieces of timber with absolute accuracy all day long. The included 216mm blade gives a large cutting size with a depth of 7cm and cutting width of 31.2 cm which will allow you to cut some large 4 by 2 inch timbers, large planks as well as the finishing touches around the house. Make sure the tool is connected to the power supply, but do not activate the on/off button while adjusting the laser. A big selling point for Bosch saws is the readily available spare parts and the large dealer network for any problems or maintenance issues. As this is one of the biggest brands of high quality power mitre saws in the world you will have no problems getting advice and the parts to keep your saw running smoothly. I still made the point of adjusting the fence to find out how easy it was to fine-tune the saw though. It’s not quite as simple as adjusting the Einhell TC-MS 2112, but then this is a much more complicated beast to deal with overall.
Great Deal 
New Comment