Lithofin ALGEX Special Remover 1L

Product Information

Lithofin ALGEX should be diluted with water approx. 1:10 (when used as a preventive treatment 1:20) and distributed on the surface using a watering-can or a sprayer. After application, the areas should not be rained on for at least 4 hours. The surfaces will become bright, clean and free of deposits within a few days. Surface residues can be washed off with water or they will disappear when it rains. Please Note: The product is not harmful for plants, however, they should not be sprayed or should be washed off immediately. Lithofin ALGEX - 1 LITRE. (Algaecide) should be diluted with water approx. 1:10 (when used as a preventive treatment 1:20) and distributed on the surface using a watering-can or a sprayer. After use, remove sprayer and rinse well with water. Close bottle with child-proof cap. Keep in cool and dark conditions. Store bottle standing up. Use product within 6 months. Frost resistance testing is called the Freeze/ Thaw test and is conducted by repeatedly freezing the paving to -40 Fahrenheit and then thawing it, before repeating the cycle again. During this process the paving will lose some of its flexibility and the key to good quality paving is that it does not lose a high level of resilience during the test cycle. Losses in Mpa should not exceed 5 Mpa

Further to stringent test procedures, all paving sold through Paving Superstore is ethically sourced with all manufacturers belonging to the Ethical Trading Initiative or alternative schemes. This promises that: The water absorption test measures the amount of water a stone can hold when fully saturated. This is expressed as a percentage of the total weight. So, a result of 1% means that when fully saturated, 1% of a stone’s weight will be water. As a guide, paving such as porcelain is usually less than 0.5% porosity, granite is around 0.5%, sandstone and limestone are in the region of 1-3% and concrete, 6% Lithofin ALGEX - 1 LITRE. (Algaecide) is a special product from the LITHOFIN-range. It is a water-soluble cleaning concentrate based on high quality surfactants. Neutral and free of chlorine and acid.For cleaning all outdoor areas, such as stairs, paths and terraces, walls, grave stones, roofs, wooden fences, etc. Ideally suited for preventive treatment against green, slippery deposits. After-treatment: As a further precautionary measure to prevent the growth of algae and the penetration of water, a final impregnation with Lithofin Splash-Stop or Lithofin MN Colour Intensifier is recommended. Lithofin ALGEX also has a preventive effect, keeping surfaces clear of new green deposits for up to one year. Lithofin ALGEX is a special product from the LITHOFIN-Range. It is a water-soluble cleaning concentrate based on high quality surfactants. Neutral and free of chlorine and acid. The flexural strength is important as it ensures the paving is not overly brittle which would cause difficulties when handling and laying. Compression Limits (BS EN 1926

Please Note: Lithofin ALGEX - 1 LITRE. (Algaecide) is not harmful for plants, however, they should not be sprayed or should be washed off immediately. Hint: after several days, treat the surface with ALGEX and repeat this treatment on a yearly basis. The preventive effect of ALGEX will help to keep outdoor surfaces clean and free of green deposits. Please note that the above charges are subject to a 65p surcharge for all deliverieswithin the London Congestion Charge area (EC1, EC2, EC3, EC4, N1, NW1 2, NW1 3, NW1 5, SE1, SE11, SW1, SW11, W1, W2 2, WC1 and WC2) Step 4 - once you are on our quote system, simply complete the form on the right hand and send over your requestFind out more about what cleaning solutions to choose for porcelain paving. What not to use when cleaning a porcelain patio