ManCage Chastity Cage, Number 01, Transparent

Product Information

Under the Work at Height Regulations 2005 (WAHR) all work at height must be properly planned, organised and the risks controlled. Under the Health and Safety at Work etc Act 1974 employers or people who have control of premises have the duty to ensure the safety of their employees and other people on the premises.

A triangular ring (not round like the other cages) to fully adopt the appearance of the male scrotum and help bring the cage over a long period. The platform shall be in the correct position so that the person does not need to lean out to perform the work There is a very wide range of specially designed equipment for lifting people, enabling them to work safely at height (See the Step-by-step guide). The correct type of equipment should always be selected for the task in hand and it is vital that the activity is properly planned through risk assessment. The risk assessment should also take account of the specific requirements of LOLER (regulation 5) and the Approved Code of Practice for lifting people. Some people using the equipment may be less familiar with the risks so training and adequate supervision in the operation of the equipment are very important. Once you are in an ideal state and ready to attach the device, treat lubricant as your new best friend! Ideally use a water based lube that won’t interfere with the material of your device (silicone lube should not be used with silicone devices) and apply liberally to your genitals (shaft and testicles), you can also apply a small amount to the inside of the device but be aware you may then need to wear gloves to allow some friction to keep hold of the device during the next steps! Steer clear of any “tingle” or “heat” type novelty lubes and consider what will be best for your long-term comfort. 4. The base ringPM28 also gives further guidance on what 'occasional unplanned use' means. It clearly states that non-integrated platforms should only be used for work, which is 'exceptional'. Exceptional work would include unplanned work such as the changing of a single light bulb as an emergency job. All persons involved with work platforms should be properly trained, including action to be taken in the event of an emergency Communication:

Man cages create a safe elevated workspace, they are also known as: man box, forklift cage, man carrying cage, man safety cage, man workbox, workbox, crane workbox, forklift workbox and there are even a few other less common names used to refer to a man cage. Man cages are supplied to ensure that personnel can work as efficiently as possible, so the rails are built at half height. Attachment points are available to be used for lanyards and safety lines. Crane man cages need to be erected by chain and will have chain attachments on each corner of the cage /box.

Get Free Working at Height Advice

Manufacturers must indicate clearly, by markings on the equipment and within the instructions, if the lifting machinery is intended for lifting people. Use of lifting equipment for lifting people When issuing a Declaration of Conformity for lifting equipment, manufacturers have to assess its design and construction against these requirements, undertaking inspection, examination and testing as necessary to meet them, as well as meeting industry-accepted quality and safety standards. The Declaration of Conformity may therefore be a substitute for the initial thorough examination before first use, if the lifting equipment does not depend on post-manufacture assembly or installation conditions. The selection and use of an appropriate and suitable method of access will depend on the nature of the task to be carried out, the frequency of occurrence, the duration of the work and the availability of equipment.