Owatrol 1 Litre Net-Trol Wood Cleaner by OWatrol

Product Information

Then, whilst scrubbing the surface with a stiff brush, rinse the Net-Trol off the wood or alternatively, use a pressure washer (max 60bars / 870psi). If required, you can repeat the procedure. Leave to stand for approx 10-20 minutes. If surface starts to dry dampen with a mist application of water Leave to stand for 10-20 minutes and then scrub with a stiff brush or use a pressure washer to remove. If you have a previously painted wooden surface that is difficult to strip due to its size, has an intricate design, or has a lot of previous layers, then Dilunett is the product for you! After rinsing immediately neutralise surface with Owatrol Net-Trol except where Owatrol Tropitech All-In-One is the chosen finish. Surface and Environment

Scrub surface with a stiff nylon/synthetic brush whilst rinsing with water or use a pressure washer (max. 60 bar).

Can be used on most surfaces; on wood (some woods such as Oak and Chestnut require more attention before using Dilunett), metal (except Aluminum), plastic, stone, cement etc Owatrol Net-trol Wood Cleaner and Brightener is a powerful solution which restores weathered, greying unfinished exterior wood to its natural colour. Owatrol Net-trol is mild to use, and unlike chlorine or bleach-based cleaners will not damage the wood fibres. While restoring the wood's natural vibrancy, Owatrol Net-trol also removes any ground-in or surface dirt, resulting in a beautiful, clean-looking exterior wood surface.

After stripping and rinsing. All porous surfaces must be immediately treated with Net-trol while still wet to neutralise the surface. Clean up With a fast working solution, Owatrol Net-trol Wood Cleaner & Brightener can restore weathered wood to its original colour within 15 minutes. Net-trol is also effective in clean and neutralising tannin staining and removing rust stains. Once removed, rinse thoroughly with lots of fresh clean water, using the highest pressure from the water source available or via the use a pressure washer at 500-1000 psi (35-70 bars).Dilunett is our amazing solvent free paint and coatings remover. It is powerful enough to remove up to 8 previous coatings in just 1 application! It’s ideal for stripping large areas as Dilunett is non-flammable, does not dry out and remains active a long time. We recommend protecting and enhancing the natural beauty of your wood with Owatrol penetrating wood finishes. Restrictions New wood surfaces have a hard shiny surface called mill glaze that prevents maximum penetration and bonding of any finish; sanding or treating the wood with Aquanett removes this, ensuring maximum performance of the finish. Weathered wood surfaces (untreated) Clean surface. After cleaning wet surface with fresh clean water. Apply Owatrol Net-Trol to the entire surface over and around the nail stain. Rinse with fresh clean water but not until the stain has disappeared. As garden furniture and equipment is often metal it can rust when exposed to the delightful British weather leaving unsightly marks on your patio. These stains can be particularly stubborn and generally cannot be removed using water alone – even if using a pressure washer.

Access must be suitable for lorries which will be 3.5 tonne 7.5 tonne or 14 tonne lorries (7.5 tonne being similar to average refuse collection lorry) Immediately after rinsing and whilst the wood is still wet, you now need to apply Net-Trol to clean and neturalise the wood. Applying Net-Trol Leave to stand for around 10-20 minutes. If the surface starts to dry, dampen with a mist application of water. We hope you found this post on how to clean rust stains from your patio interesting. If you have any other advice or top tips, please feel free to leave them in the comments below. We love hearing from you!

WHERE TO USE

Whilst the surface is still wet, apply the Net-Trol with a synthetic brush, roller or sponge and work it into the wood by scrubbing it with a stiff brush.

Unlike two-part cleaners, it is mild to use, harmless to plants and shrubs whether used full strength or diluted. Leave to stand for approx 10-20 minutes. If surface starts to dry, dampen with a mist application of water. Exterior wood – weathered grey or dirty: Cedar, Larch, Pine (pressure treated or not), Teak, Iroko, Ipe, ...Usage: cleaner and brightener restores grey, weather-beaten exterior wood that is unfinished to its natural colour. Unfortunately, rust stains are an all too common problem on patios and other stone or concrete areas. Exterior – Prepare as for interior wood or treat the surface with Aquanett and then neutralise with Net-Trol. If, however, you have wooden surfaces that have become grey and dirty due to tannin bleed or weathering caused by mildew, pollution and UV rays, then Net-Trol is the product of choice!