Bosch Dishwasher Water Inlet Electronic Valve (Genuine part number 091058)

Product Information

Your dishwasher now fills up slowly. Does it seem like it takes forever to get the water running in your washer? Do you notice your dishwashing loads taking longer and longer to complete? Well, it might be a failing inlet valve that’s to blame. It is a combination of filters, pipes, solenoids, etc. Each piece or part has its functionality. So you should be careful about the below risk factors.

You’ll be working with electrical components. Are you highly confident in your abilities? Then proceed with the DIY diagnosis; otherwise, call a professional at this point. 1) Detach the dishwasher power supply With proper maintenance, you can extend the lifespan of your dishwasher’s inlet valve and enjoy years of efficient dishwashing. Connect with an Appliance Repair Technician If you switch on the dishwasher yet find it automatically shut down or refuses to start, that means the valve is going down. So you need to replace the valve. Sign 5: Overflowing or leakRemove all the screws under the main door. Look at the bottom part of the front cover of dishwashers to find the quarter-inch hex screws and remove them. The dishwasher stopped filling with water. If it got to this point, you should be very worried. This is a sign that you’ve been having inlet valve problems for ages and it’s been entirely broken. Clamp the saddle assembly in place around the pipe with its two halves square to the pipe, inserting the screws and tightening them fully. Step 4 If you have time and confidence, you can replace the water inlet valve yourself by following the below steps. Unplug the dishwasher Professional Installation: If you’re not confident in your DIY skills, consider the cost of professional installation. This can add to the overall expense but ensures a proper repair.

Age: Like all components, inlet valves have a finite lifespan. As they age, they become more susceptible to leaks and malfunctions. Turn off the hot water supply valve to the dishwasher. It is located under the kitchen sink (assuming your dishwasher is in the main kitchen).

How Can You Tell If Your Water Inlet Valve Is Failing?

Detach the water inlet valve carefully and keep the fitting. Remove the two quarter-inch screws from the inlet valve.

I try to include all the possible symptoms of a bad dishwasher water inlet valve. Besides, I am also sharing the most effective solution for each sign. But if you have the right equipment and a working knowledge of appliances, and you’re forging ahead with the DIY repair come hell or high water, here’s how to troubleshoot that pesky water inlet valve. Water Leaks: Sometimes, a faulty inlet valve can lead to water leaks around the dishwasher, particularly when it fails to shut off completely after filling the appliance with water.If the solenoids fail to provide any resistance during the test, then you need to replace the valve. Final thought Having towels or rags nearby will come in handy to absorb any water that may spill during the cleaning process, preventing any potential damage to your kitchen floor. Step-by-Step Guide to Cleaning the Water Inlet Valve Step 1: Turn Off the Power Now that the water inlet valve is exposed, it is essential to inspect it for any visible signs of debris or mineral deposits. Use a soft cleaning brush to gently scrub away any residue that may be present on the valve. Be cautious not to damage the valve during this process. Step 6: Soak the Water Inlet Valve But if the water flows slowly or not at all, the inlet valve may need cleaning. And if it’s free of debris yet still restricting water flow, you have a broken valve that must be replaced. For an Easier & Safer Repair, Call West Coast Chief Inlet valves can fail for various reasons, with the most common being wear and tear over time. Here are some factors that contribute to inlet valve failures: