Joined in 2023 
82 
63 About this deal
SATA consists of an 8 mm wide wafer connector on each end and the cable has a 7-pin connector, 3 grounds and 4 active data lines in two pairs. It has the facility to attach only one drive and so Serial ATA does away with Master/Slave configurations. The lower power consumption of SATA connection drives helps to keep the inner part of the computer case cooler and also reduces the power supply drain at a considerable range. Just my opinion though but look in the BIOS and see if there is an Option to make a SATA Drive the boot drive as that would remove the need for a Driver.
SATA drives have an additional feature of Hot plugging which mean that even as the computer is running drives can be removed or added. IDE Hard Drive: It is one of the most elements that’s needed. You know by now what IDE is. IDE hard drives are easily identifiable through their pin connection points usually. In most of the cases, the installation is by plugging it into the required component. It is needed to ensure a tight connection. After many days of IDE connection hard drives, there came the SATA hard drives which are meant to replace the IDE hard drives for their more efficient characteristics. SATA means ‘Serial Advanced Technology Attachment’. The main characteristic which differentiates SATA from PATA or IDE is that in SATA the information moves between the hard drive and motherboard as serial one, i. e. one bit after another.
IDE To SATA Converter
USB ports can only deliver so much electricity to power portable HDDs, not regular HDDs. So, you will need to use a separate power adapter. How do I know if my HDD is SATA or IDE? The SATA cables are up to 40 inches. So it is an advantage of SATA over IDE which is the management of cables and length of the cables connecting the hard drives and motherboard. When you have extra length in cables, more flexibility of the positions of the drive can be attained. Firstly, open the external part of your computer or your computer case to get access to the motherboard and the hard drive connections. You may need a screwdriver or may not need
I personally feel that you should not ask this question at this moment of reading. After reading the advantages of SATA, you should know it by now why you need to connect to SATA. In modern times, there is no competition of SATA with IDE; SATA is always ahead of IDE. Great, Now we have a formatted SATA drive and a partition for OPL ready for games. Game Installation Under Device Manager, look for specifications in storage menu. If it says S-ATA or Serial ATA, it’s SATA. For IDE devices, it can say EIDE or just IDE. Summing Up SATA motherboard: As you know, SATA is the current standard for the connection of hard drive to the motherboard. This is obviously a replacement for the previous IDE connection. It is easily identifiable by the simple plug with only one connection point. SATA motherboards are more likely the present standards and are more efficient, faster, and more stable.
About the Author
Lastly, close your computer case. After plugging in power supply, boot your computer. There might be some last setup procedures that’ll take place at the time of the boot process, if either your IDE drive is somehow new or has no data stored on it. You should always follow any on-screen In most cases, no additional set up is usually necessary and you will find the drive simply available for storage use.
SATA has also done away with the master/slave configuration (technically, device 0 and device 1) used in IDE drives. With PATA (IDE), attaching two hard disks to the same channel required one to be set to be the master, the other the slave. For hardware, this usually meant setting the right jumper settings. SATA (right) and IDE (left) hard drives. The SATA hard drive has the data cable on the right and power cable on the left. The IDE data cable is ribbon-like (on the left)There are four to six SATA connections usually in a normal motherboard which allows multiple SATA hard drives to hook up.
Great Deal 
New Comment