Joined in 2023 
82 
63 About this deal
ARC (Audio Return Channel) helps you connect your sound system and TV through one HDMI cable. This configuration eliminates the need for more cables to support two-way visual or audio transmission. The HDMI ARC system can improve quality, consistency, and convenience in transmitting audio signals in your home. What Is Optical? Some devices don’t have an HDMI port for audio-visual connectivity. Optical audio can guarantee good signal quality across all the connected devices.Toshibawas the first to introduce Optical cables in the 80s, and they became the easiest way to transmit Dolby Digital and DTS to your AV receiver. HDMI ARC vs. Optical: Side-by-Side Comparison SDI video input is switchable between high definition, ultra high definition and 4K. SDI switches between 1.5 Gb/s HD-SDI, 3G-SDI, 6G-SDI and 12G‑SDI. SDI VideoSampling Since the TV is sending audio to the sound bar, you need to connect the sound bar to an output on your TV. Might be I'm overthinking it all at the 'level' of equipment i have...so if you say 'just run what you have' I get it too... :)
HDMI cable - use this to connect your PVR to your TV to display channels and recorded shows from your PVR. And, in our experience, compared to optical, a coaxial connection does tend to sound better. That's because it has greater bandwidth available, meaning it can support higher quality audio up to 24-bit/192kHz. Optical is usually restricted to 96kHz.
The HDMI interface has evolved over the years, with new versions ( HDMI 2.1 is the latest) bringing support for new audio and video technologies such as 3D, 4K, 8K, HDR and 4K/120Hz, to name but a few. Even though most of the HDMI audio extractors listed in this guide are compatible with Roku, the Tendak 4K x 2K HDMI to HDMI and Optical TOSLINK SPDIF + 3.5mm Stereo Audio Extractor Converter works best with Roku. Newer sets have HDMI ARC ports - these act as an input and an output, sending the audio and video to and from the device it's connected to. This is the ideal connection for your sound bar.
LG was the first manufacturer to go all-in with the new standard, producing the first 4K TVs to sport HDMI 2.1 ports in 2019. All LG's 2022 and 2023 OLED TVs have up to four HDMI 2.1 ports, with Samsung offering one on most models and four on its flagship sets. Meanwhile, much of Panasonic and Sony's 2022 and 2023 ranges also sport a mixture of ports. As you can see, HDMI ARC and Optical are different. An HDMI ARC is the best option if you want the best audio quality. It’s very convenient, easy, and simple to set up. You can use it on all devices, and it supports all audio formats. Plus, it can help you avoid clutter and tangled cables. It also has to be implemented correctly so it's always running of battery. Many claim they do but in reality they really don't. Sinewave batteries can just produce stable clean power when done correctly, which is often very expensive. The majority of TV and AV products launched over the last few years support HDMI version 2.0, but HDMI 2.1 (which supports 8K resolution content and features such as ALLM) is becoming more common among modern TVs and AV kit.
Blackmagic Universal Rack Shelf
Set up your soundbar by connecting one end of an Optical to the audio-out port on your device. After that, connect the other end to the audio in the portal on the soundbar. Remember to change the speaker output default setup on your device. HDMI’s feature set, upgradability and the fact it can handle both audio and video means you don’t need to worry about too many wires clogging up your system. And, best of all, you won't sacrifice performance. If better to use the receiver; I have an optical cable already. I take it from your opinion that there shouldn't really be anything in it between that and a similar quality coaxial cable? (makes sense to me). Also, coaxial doesn't have the bandwidth required to support high-quality surround sound formats such as Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos and DTS:X. So, in a modern home cinema setting, its uses are quite limited. SMPTE259M, SMPTE292M, SMPTE296M, SMPTE310M, SMPTE425M levelAandB, SMPTE2081‑1, SMPTE2081‑10, SMPTE2082‑1, SMPTE2082‑10, ITU‑RBT.656 and ITU‑RBT.601
And while digital optical is limited to these older formats, that doesn’t mean it sounds bad. You can still get really good-quality surround sound out of an optical connection. So if that’s your only option, then use it! If you are looking for an HDMI audio extractor that supports the highest video resolution to 4K at 60 Hz, the J-Tech Digital 4K 60 Hz HDMI Audio Extractor can be a good buy. HDMI ARC and Optical provide better performance when compared to the analog format (white and red cables). The significant difference between them is that Optical can’t transfer video signals. Most of the audio and video devices you buy for a TV plug in to an HDMI connector, but if your TV only has two HDMI inputs then it will be at capacity with just a Sky box and a Blu-ray player. If you are looking for an HDMI Audio Extractor with ARC, we highly recommend the OREI Audio Converter Extractor + ARC Support + SPDIF + 3.5mm Output HD-925.Compatibility of HDMI Audio Extractors With Different Devices 5 Best HDMI Audio Extractors on the Market Optical Cables and HMDI ARC are made up of different materials. Copper is the primary material used in the production of HDMI cables. It is inexpensive and malleable, which makes the production process easy. Copper has also survived the test of time within the data transmission industry despite being susceptible to interference from electromagnetic waves.
Both HDMI ACR and Optical can transmit multichannel audio and support several audio formats. Optical audio matches that of HDMI ARC connection in an average home. Optical cables can only support sounds like Dolby Digital, DTS, and Stereo. Firstly, you can use this HDMI audio extractor to extract HDMI signals from all HDMI-compatible devices and convert them into digital optical or 2CH left-right audio output.
The basics
On the other hand, HDMI audio extractors with HDMI outputs comprise both analog and digital outputs. How to Find the Right HDMI Audio Extractor – Buying Guide That being said, you can still get non-object-based surround sound with an optical connection — up to 7.1 channels of Dolby Digital or basic DTS — but if you want to experience enhanced formats like Dolby Atmos, Dolby Digital Plus, Dolby True HD, or DTS:X, you need to use HDMI ARC or eARC. And if you happen to be into encodings like DVD-Audio or SACD, you need HDMI ARC for these formats, too.
Related:
Great Deal 
New Comment