Clear water Hot Tub, Pool and Spa Test Strips x 50-3 in 1 - Measures Chlorine, PH and Total Alkalinit (Pack of 1 (50 Strips))

Product Information

Clearwater pH Minus , also known as ‘pH reducer’ is the most simple and effective way to decrease the pH of your spa water when it has surpassed the recommended level. pH minus can also be used to lower TA (Total Alkalinity) levels. The hot tub test strips highlight, chlorine levels, the water's pH and Total Alkalinity levels. There are three separate sections on each strip to indicate each individual level. It is important to get your hot tub Chlorine levels correct. Not enough Chlorine can result in unhygienic bathing conditions, whereas high Chlorine levels can cause irritated eyes or skin. Remove cover from pool to allow evaporation of the chemical (keep the pool filter running constantly). Dip a ClearWater® Test Strip in the centre of your Lay‑Z‑Spa, remove and hold it still for 15 seconds.

This TA Increaser helps raise Total Alkalinity levels, which in turn will help control pH levels and chlorine. Drain pool to minimum mark and re-fill with fresh water to maximum mark, this will help to dilute the excess chemical. Clearwater Multifunction Tablets are an effective and hassle-free way of maintaining clear and healthy spa water. They contain a combination of chemicals that act in a number of ways. These slow-release tablets contain chlorine, algaecide and water clarifier. The chemical dispenser slowly releases the mini-tablets into the water, making this a completely hassle-free way of treating your water even for the user with a busy schedule. Dissolve the quantity of Chlorine Granules in a jug of warm water and pour into your hot tub. Activate the AirJets for a few minutes to circulate the chemicals evenly throughout the water.

Please note: The table is only applicable to Clearwater® Chemicals. Dosages are only approximate and the effect of chemicals on your water can vary each time you use them, depending on the exact amount of water in your hot tub, water type, water temperature, positioning of hot tub etc. Therefore it is essential to test the water every time before you use it. When you’re ready to begin mixing your chemicals, you should handle them with chemical resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. It is also advised to wear tightly sealed goggles and appropriate protective clothing such as long sleeves, trousers, and closed-toed shoes that fully protect your feet from spills. You should also wash your hands after handling chemicals. Chlorine levels of a spa should be 3‑5 ppm, pH levels should be 7.2‑7.6 and Total Alkalinity levels should measure 80‑120 ppm.

Do not eat, drink or smoke when using this product. Have a First Aid Kit available for any accidents

The award-winning ClearWater® Pool Starter Kit is ideal for getting started with pool chemicals and easily understanding how to get a clean and healthy swimming environment. Dip a ClearWater® Test Strip in the centre of your Lay-Z-Spa, remove and hold it still for 15 seconds. The Clearwater® Dip Tests are manufactured by the founders of dip testing in the USA and are the most accurate available on the market so you know you're getting an accurate reading every single time. For high chlorine levels above 5ppm, we would suggest you drain the Lay-Z-Spa to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chemical. Or, remove the cover from the hot tub to allow evaporation of the chemical (keep the spa filter running constantly). Drain hot tub to the minimum mark and re-fill with fresh water to the maximum mark, this will help to dilute the excess chlorine.