Kitchen/Utility Window Extractor Fan - 6" 150mm with Automatic Shutter

Product Information

The VA150 range is fitted with internal and external louvres conforming to the latest international safety standards. On the downside, the unit is a bit basic; but given the price, you can’t really expect to get all the bells and whistles. Who Should Buy This Model?

It’s a great choice as a new addition or an upgrade. The pull-cord is one of those“nice touch” accessories, and the ease of installation is a breath of fresh air (if you pardon the phrase). Any noise you hear from this product is just the airflow, not a mechanical sound. Who Should Buy This Model? The fan’s timer has a default setting of 15 minutes, but it can be adjusted from 30 seconds up to 30 minutes. Who Should Buy This Kitchen Extractor Fan? In this case, the highest CFM doesn’t mean it’s the best unit for you. Your focus should be on getting a CFM that’s sufficient for your specific needs and space requirements. Higher CFM for a smaller space leads to a waste of energy. As a general rule, 1 CFM for every square foot of space plus an additional 50 CFM should be the equation. Internal FansIf you’re unsure whether your setup supports this kind of installation, we highly recommend asking an electrician to confrim before purchasing. While you may be experienced in DIY, installing an extractor fan requires cutting holes through ceilings and walls, installing ducting and working with electrics. This process can be complex, although it is worth noting that it is easier to replace an existing fan than to install a new one.

Size of extractor fan: The size of your room and the amount of ventilation already in place will determine the size of the extractor fan you require. Larger fans will be louder and more expensive. Nevertheless, the Xpelair C4TR has its perks, such as its sleek design, great value for money, and the range of model options you get. Pros: On/off switch, pull cord or automatic: Extractor fans can be activated with switches, cords when turning on lighting, or even be automatic. This can affect the cost of your fan installation. This can be interpreted in multiple ways but Vent-Axia and the wider installation community would recommend use of at least IPX5 fans for typical Zone 1 or 2 installations due to the potential use of the shower (presently or in the future) which could be considered a water jet.

OOPPEN has really threaded the needle on this extractor fan, offering up a high-quality unit for a very reasonable price. For instance, OOPPEN opted for an ABS construction – including the front panel – ensuring that it will not bend or become deformed during use. This fan also features a copper motor with thermal protection, meaning you can use this kitchen extractor fan continually and without maintenance.

Since April 2006, it’s a legal requirement to have ventilating equipment that expels kitchen fumes to the outdoors. So, kitchens built from April 2006 onward meet regulation if the air is extracted externally, and don’t if the air gets recirculated instead. Does an extractor fan use much electricity? When choosing ventilation, it is important to think about the legislation surrounding bathroom installation and the safety of the residents. Fans need to be installed in accordance with the latest IEE Wiring Regulations 18th Edition (BS7671:2008). Part 7 (Special Locations).

A small kitchen extractor fan is one of the best buys for your home and a great low-cost solution for expelling steam and smoke from your kitchen. Remember that some kitchen extractor fans (such as those with a timer) require special wiring that might not be compatible with your current setup — always consult an electrician to be sure. Accessibility: Depending on the type of fan you choose, it may be necessary to access your loft which will take longer due to the difficulty of the job. This unit is expensive. It’s also designed for commercial use, weighing in at nearly 3 kg, about three times the typical weight of a 6-inch kitchen extractor fan. However, the high-performance nature of this fan and its extraction power is truly what sets it apart. If you’re looking to do a lot of cooking and want a specific range hood, there’s nothing stopping you going down that path; it’s a completely understandable decision that will ultimately depend on your kitchen size and culinary exploits. Kitchen Extractor Fan FAQs How does a kitchen extractor fan work? Decide which window will be the most suitable to help remove condensation and unpleasant smells. Whilst fans should be positioned at least 1.8 meters from the floor, they should also be fitted close to the main areas where smells and condensation frequently occur. Keep this in mind when choosing which window you are going to fit your extractor fan into because placing it in a window too far away from vapor and odor sources will render it ineffective. Step 2 - Measure Up

In most domestic kitchens, you’d need extractor fans that can perform, on average, 15 air changes per hour. To zero in on the optimal fan extraction rate (typically measured in litres per second or metres cubed per hour), you’ll first need to calculate the volume of your kitchen (L x W x H). For instance, if your kitchen is 3m x 4m x 2.8m, the volume is 33.6m2. Ideally, you’d replace this volume of air 15 times in a single hour; with this in mind, you can calculate the ideal extraction rate: Measure on to the pane of glass where you want the window extractor fan to be fitted. The size of the hole will be dependent on the type of fan being fitted, so be sure to refer to any schematics provided in your kit. Always make a mental note that the fan housing is larger than the hole so always make sure that you leave sufficient space around the hole to accommodate it. Step 3 - Cut the Glass One fan: a single fan may seem less efficient as compared to its counterpart, but the truth is that a one-fan unit is equally suitable and tends to deliver better airflow. It is preferred in kitchens with smaller windows. This fan is quite small, so obviously you won’t be using it in a commercial kitchen; but this was never Manrose’s intention with the QF100T anyway.

Contact Us

We could talk about the special Japanese ball bearings, or the meticulous product design, but we think the simple fact that this extractor fan can get you 50,000+ hours of life (5.7 years) tells you all you really need to know. Remember: this is working life, not lifespan from the day you open the box until the day it gives up the ghost.