Engine Stop Kill Switch Control, Engine Stop Switch Durable Stable Performance Portable for GX390 Engine

Product Information

When the switch is OFF, the engine will not run. Use this switch to turn off the engine in an emergency. Momentary High Beam Switch Your ATV has one or two hand brake levers, a foot brake lever, and a parking brake feature. Hand Brake Lever Squeeze the brake lever toward the handlebar to apply the brakes. Most modern ATVs have a rev limiter to prevent unintentional, fast acceleration when in reverse. Unintended acceleration can happen when the rider’s leg or hip accidentally pushes on the throttle switch while driving in reverse.

The essential controls of an ATV include the handlebars for steering, brake levers to stop, a throttle lever to control speed, and various switches for operating the lights, winch, and ignition system. Before starting the installation, make sure you got the correct parts. Use our Product Advisor to find the part numbers suitable for your bike.

Variants of Kill Switches

In this guide, we cover the five types of automotive kill switches, so you can determine which is best for you. We also look at the total cost you can expect. What is an Automotive Kill Switch?

Turning the switch to the OFF position removes all power from the vehicle. This feature may come in handy to reduce the risk of the battery draining when the ATV sits for long periods.

Honda Stop Switch 1 Wire

Without a well-running ignition system, there’s no way to start the car. With this switch, you interrupt the flow of ignition by adding a break in the wiring. To install it, you must cut the ignition wire and put a connector on each side, installed into the switch. You can route the switch itself somewhere secret in the vehicle’s cabin, where no one can see it. You mixed the QSH connector pairs. Disconnect ONE bike connector at a time, and connect ONE pair of the QSH connectors in-line with the coil and bike plug, then proceed with the next. Depending on what type of transmission your ATV has, it will have either a switch, a hand lever, or a foot pedal to shift between gears. By activating the reverse override switch, you temporarily deactivate the rev-limiter as long the button is pressed. Use this switch with caution. It’s easy to lose control of the bike while driving fast in reverse. Winch Switch

Noticing the warning early and identifying what’s causing the alarm can prevent expensive repairs down the line. The gauges may be digital, analog, or a combination of both. The displayed information aids the rider in driving the vehicle safely and within legal limits.

Process of Kill Switch Mechanics

So in that respect it doesn't matter how you turn the bike off, the ECU doesn't get unpowered abrubtly. Activates all turn signal lights to flash simultaneously. Use this feature to alert others of an emergency or a situation that requires caution. Turn Signal Switch Gear shifting controls on Manual ATVs: Some youth ATVs or budget adult models come with a manual gearbox and a foot pedal to shift between gears. In addition, you’ll find a clutch hand lever that needs to be compressed each time you switch gears, like on a car with a manual gearbox.