Oxford EL570 Oximiser 900 Essential Battery Management System, Black/Yellow

Product Information

Smart charging is all about monitoring the battery condition, applying the correct rate of charge at the right time to keep the battery healthy but also to optimise power consumption by a unit designed to be left plugged-in.

However, they require very different charging characteristics, and as such, you should be careful not to pair the wrong charger with the battery, as this can have a negative effect on the battery and can even be dangerous. From the instruction manual: Use this charger for charging a LEAD-ACID battery type only (VRLA, GEL, AGM, MF). It is suitable for charging batteries AnswerThe Oximiser 3X can be used on lithium batteries, however all our other chargers have not been tested to be used on lithium batteries.

Does this come with eyelet / fused ring leads that can be permanently screwed to the batteryterminals? March 24, 2023

The other important point to consider is, depending on the brand, age, condition, and number of 'life cycles' for the offending battery it may be BER (Beyond Economical Repair). The Oxford Oximiser comes supplied with a connection wire which can be permanently attached to your battery. The wire leading from the battery ends in a connection point which can be placed in a convenient position such as under the seat etc. This will be fine - let the battery stand for an hour before charging, and leave the cap off while charging for the firsttime.

Motorcycle

The battery on my bike is a AGM (absorbed glass Matt) sealed lead acid battery. This type of battery isn't listed for the this charger. Is the Oxford Oximiser 900 suitable to use on this type ofbattery? July 30, 2019 Is this charge suitable for Lithium Batteries. I have read some manufacturer statements saying as long as they are not left on for long periods and the chargers don't charge at 15+ volts they should befine? January 29, 2018