Ram memory 8GB kit (2 x 4GB) DDR3 PC3-12800,1600MHz, 204 PIN SODIMM for laptops

Product Information

Shilov, Anton (August 16, 2010). "Next-Generation DDR4 Memory to Reach 4.266GHz – Report". XbitLabs.com. Archived from the original on December 19, 2010 . Retrieved 2011-01-03.

In February 2005, Samsung introduced the first prototype DDR3 memory chip. Samsung played a major role in the development and standardisation of DDR3. [2] [3] In May 2005, Desi Rhoden, chairman of the JEDEC committee, stated that DDR3 had been under development for "about 3 years". [4] Addendum No. 1 to JESD79-3 - 1.35 V DDR3L-800, DDR3L-1066, DDR3L-1333, DDR3L-1600, and DDR3L-1866". May 2013 . Retrieved 2019-09-08. Salisbury, Andy (2009-01-20). "New 50nm Process Will Make DDR3 Faster and Cheaper This Year". Pcgamer . Retrieved 2009-06-17.How Intel Plans to Transition Between DDR3 and DDR4 for the Mainstream". techpowerup.com . Retrieved 19 March 2018.

Another benefit is its prefetch buffer, which is 8-burst-deep. In contrast, the prefetch buffer of DDR2 is 4-burst-deep, and the prefetch buffer of DDR is 2-burst-deep. This advantage is an enabling technology in DDR3's transfer speed. Alternative naming: DDR3 modules are often incorrectly labeled with the prefix PC (instead of PC3), for marketing reasons, followed by the data-rate. Under this convention PC3-10600 is listed as PC1333. [25] Serial presence detect [ edit ] Dell Energy Smart Solution Advisor". Essa.us.dell.com. Archived from the original on 2013-08-01 . Retrieved 2013-07-28. Non-registered (a.k.a. " unbuffered") RAM may be identified by an additional U in the designation. [30]Release 4 of the DDR3 Serial Presence Detect (SPD) document (SPD4_01_02_11) adds support for Load Reduction DIMMs and also for 16b-SO-DIMMs and 32b-SO-DIMMs. Compared to DDR2 memory, DDR3 memory uses less power. Some manufacturers further propose using "dual-gate" transistors to reduce leakage of current. [10] IDF: "DDR3 won't catch up with DDR2 during 2009" ". pcpro.co.uk. 19 August 2008. Archived from the original on 2009-04-02 . Retrieved 2009-06-17. Understanding DDR3 Serial Presence Detect (SPD) Table". simmtester.com . Retrieved 12 December 2015.

Fully buffered modules, which are designated by F or FB and do not have the same notch position as other classes. Fully buffered modules cannot be used with motherboards that are made for registered modules, and the different notch position physically prevents their insertion.DDR3-xxx denotes data transfer rate, and describes DDR chips, whereas PC3-xxxx denotes theoretical bandwidth (with the last two digits truncated), and is used to describe assembled DIMMs. Bandwidth is calculated by taking transfers per second and multiplying by eight. This is because DDR3 memory modules transfer data on a bus that is 64 data bits wide, and since a byte comprises 8 bits, this equates to 8 bytes of data per transfer. Power consumption of individual SDRAM chips (or, by extension, DIMMs) varies based on many factors, including speed, type of usage, voltage, etc. Dell's Power Advisor calculates that 4GB ECC DDR1333 RDIMMs use about 4W each. [20] By contrast, a more modern mainstream desktop-oriented part 8GB, DDR3/1600 DIMM, is rated at 2.58W, despite being significantly faster. [21] Modules [ edit ] List of standard DDR3 SDRAM modules

Shilov, Anton (2008-10-29). "Kingston Rolls Out Industry's First 2GHz Memory Modules for Intel Core i7 Platforms". Xbit Laboratories. Archived from the original on 2008-11-01 . Retrieved 2008-11-02. DDR3: Frequently Asked Questions" (PDF). Archived from the original (PDF) on 2009-12-29 . Retrieved 2009-08-18. According to JEDEC, [11] :111 1.575 volts should be considered the absolute maximum when memory stability is the foremost consideration, such as in servers or other mission-critical devices. In addition, JEDEC states that memory modules must withstand up to 1.80 volts [a] before incurring permanent damage, although they are not required to function correctly at that level. [11] :109 a b "What is LR-DIMM, LRDIMM Memory? (Load-Reduce DIMM)". simmtester.com. Archived from the original on 2014-09-03 . Retrieved 2014-08-29.While the typical latencies for a JEDEC DDR2-800 device were 5-5-5-15 (12.5ns), some standard latencies for JEDEC DDR3 devices include 7-7-7-20 for DDR3-1066 (13.125ns) and 8-8-8-24 for DDR3-1333 (12ns). DDR2 PC2-4200 (commonly referred to as DDR2-533) memory is DDR2 designed for use in systems with a 266MHz front-side bus (providing a 533MT/s data transfer rate). The "4200" refers to the module's bandwidth (the maximum amount of data it can transfer each second), which is 4200MB/s, or 4.2GB/s. Soderstrom, Thomas (2007-06-05). "Pipe Dreams: Six P35-DDR3 Motherboards Compared". Tom's Hardware. The DDR3 standard permits DRAM chip capacities of up to 8 gigabits (Gbit), and up to four ranks of 64 bits each for a total maximum of 16 gigabytes (GB) per DDR3 DIMM. Because of a hardware limitation not fixed until Ivy Bridge-E in 2013, most older Intel CPUs only support up to 4-Gbit chips for 8GB DIMMs (Intel's Core 2 DDR3 chipsets only support up to 2 Gbit). All AMD CPUs correctly support the full specification for 16GB DDR3 DIMMs. [1] History [ edit ] In addition to bandwidth designations (e.g. DDR3-800D), and capacity variants, modules can be one of the following: