Joined in 2023 
82 
63 About this deal
You are in the market for a new device, and you want to buy something that fits your vaping style and e-liquid preferences. The majority of e-liquids are made from Propylene Glycol. This substance carries the nicotine and flavourings in your juice. PG is thinner than VG, and MTL coils are made to work with these liquids. If you use PG is sub-ohm coils, your tank is more likely to leak. If you already own a SMOK device and you’re looking for replacement coils, the easiest thing to do is look at manufacturer recommendations. Alternatively, you can go to the Vape Green store and select some SMOK coils from our extensive range. These SMOK coils have a very low resistance (well below 1 ohm). They are best used with shortfill e-liquids with a high VG content. Are mesh coils suitable for MTL vaping?
RDL coils are similar to DTL coils, but they have a higher resistance. Something in the range of 0.4-ohms to 0.8-ohms is typical.
Uwell
As we mentioned earlier, the atomizer is the beating heart of your machine, so finding the right SMOK coil will have a significant bearing on your decision. Vaping style refers to the way that you inhale the vapour. There are a few main styles: Mouth-to-Lung: Nic Salt allows e-liquid to be vaped at lower temperatures. Additionally, the chemical process involved in the production means that the bioavailability of the nicotine is increased. As a result, it’s best to vape Nic Salt with an MTL coil. DTL or sub-ohm coils produce more vapour, which could lead to an excessive nicotine dose.
DTL vaping uses devices with high wattage to pump power into the coil. This process is able to produce a lot more vapour. However, the side effect is that it creates extra heat. To cool this down, DTL vaping uses lots of air. The 0.16 Ohm RPM 2 coil features a mesh build that can heat more e-liquid at a faster rate, this delivers better flavour along with increased vapour production. They can be used between 25 - 50W. If you’re looking for less vapour, the 0.6 Ohm RPM 2 coils will be a better choice as they support MTL vaping. Nic Salt mostly comes with a 50/50 blend of VG and PG. Typically, strengths are either 20mg or 10mg; however, more manufacturers are producing 5mg options lately. The final thing to consider when choosing the right coil is what type of nicotine you’d like to vape. Do you want a coil that can handle Nic Salts? What about the VG/PG ratio?Sub-ohm coils are generally best for high VG liquids and less good for Nic Salt. However, if you want to vape high PG liquids but use the MTL vaping style, you’ll need to choose a coil that can pull this off.
RDL is slowly becoming a more popular vaping style. It’s like DTL, but it reduces the amount of air that you mix in with your vape. This delivery option is not available for customers in Guernsey, Jersey, Northern Ireland, Scottish Highlands or Aberdeenshire. International MTL is most like smoking a cigarette. It’s a two-part process where you draw the vapour into your mouth and then down into your lungs. This vaping style uses a tighter draw.Discover the SMOK RPM 3 Replacement Coils, the latest revision of the RPM coils delivering delicious flavor and vapor from your favorite eJuice. DTL, MTL, and RDL vaping styles require different coils. You can roughly split this up as being either sub-ohm or 1-ohm and above. DTL vaping uses coils of around 0.6-ohms and below, while RDL is in the 0.5 – 0.8-ohm range. MTL, on the other hand, uses 0.8-ohm or above. The mesh is often made of Kanthal or Nichrome. The RPM 3 replacement coils by SMOK are made of Kanthal A1. How long do mesh coils last?
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly. The Smok RPM 2 replacement coils are a series of cross-compatible coils that can be paired with a wide selection of kits. This selection includes the RPM 2 kit among others. There are two versions of this coil available, one for MTL (Mouth To Lung) vaping and the other for DTL (Direct To Lung) vaping, giving you the option to experiment and discover your perfect vape. With 0.15 ohm and 0.23 ohm options, these are versatile coils from SMOK that allow you to tailor your vape to your preferences. SMOK have created them with top quality kanthal to create coils that will last a long time and achieve great performance from your pods. SMOK RPM 3 Coils Features Now that you understand the various factors that influence which type of atomizer to use let’s look at a few different SMOK coils. When it comes to e-liquid, the 0.16 Ohm coil works better with 70% VG e-liquid or higher, the 0.6 Ohm coil can be paired with 50/50 e-liquids and high PG e-liquids.
Large Juice
Vaping style is one of the first things you need to consider when choosing between all the different SMOK coils. However, other SMOK devices are compatible with SMOK coils that come in different ranges to facilitate DTL or MTL vaping. As more devices come to the market that allow DTL, MTL, or RDL, it’s the coils that make this versatility possible. DTL vaping, also known as Sub-Ohm vaping, is a different vaping style. You draw the vapour into your lungs in one continuous process, direct to your lungs — no stopping off in the mouth. This style involves a very airy vape and produces big clouds. However, one thing you’ll notice with SMOK coils is that they offer a lot of different options for vapers. For example, let’s take the SMOK Nord compatible coils. They come with five different options: If you’d like to read more about the different vaping styles and their pros and cons, try these articles:
Great Deal 
New Comment