Tefal Ultimate Pure Steam Iron, 260g/min Steam Boost, 350ml Water Tank, 3m Power Cord, 3100W, Black and Rose Gold, FV9845

Product Information

The most powerful Tefal steam iron that stops limescale stains** on clothes. Only Ultimate Pure features the exclusive and patented MicroScale filter technology, a two-in-one innovation that stops scale* and produces pure steam for ultimate ironing. Here’s how it works: steam, polluted by limescale in the steam chamber, enters the filter. The filter captures even the smallest of scale particles** and produces 100% filtered, pure steam – so, you can iron without the worry of scale staining your clothes. It’s easy to clean, too: just pull it out to remove the scale in one go. Combined with Tefal’s most powerful steam – up to 60g/min continuous and a 260g/min steam boost – this guarantees perfect ironing results. You have used a starch type product on your laundry (Always spray to the reverse side of the fabric to be ironed and clean your iron afterwards). The higher the wattage, the faster the iron will reach the desired temperature. Where can I dispose of my appliance at the end of its life span? Gently shake your iron to reactivate it, the lights should start to flash and then the product should start to heat up.

Note: Never use the vertical steam function on an item being worn by anyone. Can I use my steam iron for Dry Ironing? All irons contain a thermostat light. It is normal for the thermostat to turn on and off. It indicates the thermostat is working and your soleplate is being maintained at the desired temperature. If the auto-off light blinks, you must disengage the auto-off function. This is done by gently shaking the iron which will allow the iron to reheat. Why did my iron smoke on first use? The automatic steam features means there’s no need to set the steam, so you can just get on with the job. Ultimate Pure also has the new Durilium Airglide Autoclean soleplate with 33% more glide**** for fast and effortless ironing. 100% active steam holes ensure maximum steam distribution, so you can get through your ironing pile efficiently, while the Autoclean Palladium coating helps to keep it stain-free over time without any maintenance. Rounding things off are a generous 350ml tank for fewer refills and an extra-long 3m cord for maximum mobility. Ultimate Pure even turns itself off if left unattended for added safety.Never clean your iron's soleplate with abrasive or metallic pads. How can I avoid shiny marks on fabric?

No, you must always unplug the iron before filling it. How can I avoid scratching the soleplate of my iron? Warning: The use of iron cleaner will cause damage to your soleplate's autoclean coating. Technical support My iron is not heating up. The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through. The soleplate of my iron is giving off a yellowish colour that is staining my clothes. The Durilium Airglide Autoclean soleplate brings 33% more glide* and maximum steam distribution for efficiency and the Autoclean coating keeps it clean.

If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution. How to better use my product What type of ironing board should I use? Cleaning the anti-calc valve: Remove the antiscale valve and soak the valve in a cup of white vinegar or plain lemon juice for 4 hours. I want to remove the water from the tank but there is still a little left. See the instructions for use to find out what type of water is appropriate and clean the soleplate from time to time with a damp sponge. What is the right temperature for my clothes? Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.

The selected temperature is too low to use this function: set the thermostat to the zone between 3 dots and MAX. Remove the anti-scale valve (or set the control to self-clean/autoclean depending on the model). Steam, water and scale deposits will leave the steam chamber through the steam holes and the iron will be clean. There is not enough water in the tank. Fill it up with the quantity indicated in the instructions for use and push spray button several times to fill the system complete. Why does the indicator light keep going on and off? I found the settings are easy to read on the Iron and pretty much straight forward to understand by the descriptive Icons.

User manual and frequently asked questions Ultimate Pure

Or, you have over-filled your iron – do not go beyond the "MAX" level on the tank. The iron doesn't glide very easily. The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it. What should I do if my appliance is not working? Yes and you do not need to fill the tank with water. Set the variable steam control to Dry and set the temperature to suit the type of material (care points •, ••, •••). There is not enough water in the tank. Fill it up with the quantity indicated in the instructions for use and push spray button several times to fill the system complete. The indicator light keeps going on and off.

The clothes have not been rinsed enough and there is detergent left on them or you have ironed a new item of clothing before washing it. Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron's soleplate, use a damp sponge on the soleplate while it is still warm. Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. Always use untreated water in your iron. If your water is very hard, we recommend you use a mix of 50% untreated tap water and 50% distilled water. The "supersteam" or "turbo" function should not be used intensively – wait a few seconds between pressing the button. Why does my iron release steam once the tank is filled?It is not designed for the water to be removed completely. It is okay to use or store the iron even with a small amount of water remaining. When storing, please remove as much water as possible and store in an upright position. How do I clean the soleplate? You are not using the right type of water (Refer to the FAQ "What water should I use for ironing?"). Self-cleaning: heat the iron, unplug it, remove the anti-calc valve and spray the iron over the sink. You are filling the tank with the "Dry/Steam" control set to Steam – it needs to be in the "Dry" position. The ultimate pure steam iron by Tefal brings together awesome steam power with an exclusive calc management system, for perfect ironing that goes the distance.