4.5kg BUTANE GAS REGULATOR SCREW ON TYPE FITS CALOR 4.5kg Cylinder

Product Information

They should be fitted downstream of pressure regulators in oxygen, acetylene, propane and hydrogen systems. The gas cylinder and outlet valve are designed to supply gas through an approved pressure regulator. The bullnose, or POL, propane regulator is very versatile as it fits most propane gas cylinders between 6kg and 47kg. The Gaslow 21mm Clip-on Adaptor 01-1670 can also be used to connect to the Gaslow Local Cylinder connection hose. The adapter then converts the 21.8LH fitting on the 01-4500 hose to fit a 21mm gas cylinder connection. A new LPG safety system developed for Calor enables the consumer to reset the regulator should the gas pressure exceed recommended limits, protecting appliances and property. Clear visible indication and resetting are performed by a "Push to reset" system, similar to electrical consumer RCD protection.

GAS REGULATOR SCREW ON TYPE FITS CALOR 4.5kg 4.5kg BUTANE GAS REGULATOR SCREW ON TYPE FITS CALOR 4.5kg

open cylinder valves slowly using the correct spindle key or the handwheel fitted on some cylinders The Calor Essentials CSR 485 Propane Cylinder Regulator including Consumer Safety Reset (CSR) Over Pressure Shut Off (OPSO*) system. You can also get clip-on regulators with 27mm valves to fit patio gas (propane) cylinders, also known as leisure gas.The standard clip-on butane regulator has a 21mm valve and can be used with all modern butane gas cylinders larger than 4.5kg. Calor Appliances is operated by Hamilton Gas Products Limited (NI053912), a joint venture partner of Calor Gas,whose registered office is at 7 Balloo Crescent, Bangor, Co. Down, Northern Ireland, BT19 7WP

21mm Clip-on Gas Cylinder Adapter Gaslow 21mm Clip-on Gas Cylinder Adapter

Non-flammable gases such as oxygen, nitrogen, argon and air all have conventional right-hand threads.

Flammable gases such as acetylene, hydrogen, propane and mixtures containing fuel gas all have left-hand threads. This propane screw-in regulator is a vital piece of equipment for any outdoor enthusiast who wants to ensure that their gas appliances are operating safely and efficiently. With its durable and simple construction, this regulator is the perfect addition to your propane-powered camping or caravan setup. Do not attempt to remove the gland nut as the broken spindle could be ejected or unwound at great risk to the operator.

Regulator Screw-on | World of Camping Butane Regulator Screw-on | World of Camping

The Gaslow 21mm Clip-on Adaptor 01-1670 is used to Convert 21 mm clip on Gas cylinders, such as used on Calor gas Butane gas cylinders, to 21.8LH screw thread. Output pressure through the adapter will be cylinder pressure. Normally connected to a bulkhead mounted 30mbar regulator via high pressure pigtails. Never interchange left-hand threaded pressure regulators between gases. They are designed for use with a specific gas and to interchange them could be hazardous.Propane Regulator 37mbar.Capacity 1.5kg/hr Max Inlet pressure 20bar Operating pressure 37 mbar or 50 mbar Inlet Male UK Pol 5/8 BSP LH Nozzle outlet to suit 8mm ID hose Approved to EN128642001. Ideal for catering equipment, boiling rings, BBQs. All these regulators have a nozzle size of 8mm, which means they require a gas hose of 8mm internal diameter.