TOPPING MX5 Headphone DAC Amplifier Class D Power Amp 70Wx2 NFCA 1600mWx2 USB/OPT/COAX/Bluetooth/TRS/RCA Input Desktop Home Audio Decoder 384kHz/DSD256 with Remote Control (Black)

Product Information

Topping has announced its latest desktop all-in-one DAC/Headphone AMP/Power AMP, the Topping MX5. MX5 is a successor to the widely-acclaimed Topping MX3. It features a premium ESS Sabre DAC chip paired with an XMOS USB processor and a high-performance Qualcomm QCC Bluetooth chip for high-resolution audio signal decoding and wireless Bluetooth input support. Topping has featured NFCA Headphone Amp circuit on the MX5 providing up to 1.6W of output power at 32Ω of load. They have also equipped the MX5 with Infineon Merus Class D Power Amplifier chipset delivering 70W of clean output power for your speakers at 4Ω of load and 10% THD+N, even at high-quality THD+N 1% it outputs 55W of clean power. The ex5 has RCA outputs (benefit for myself) and slightly better specs on paper (kHz, DSD, THD etc.) I imagine the composition of PA3s + E30 + L30 + BT + NJW1194 electronic volume from information such as photographs. MX5 has two memories for remembering your custom settings. Users can store the information such as current input selection, output selection, volume setting, bass/treble EQ settings, and gain settings. This allows the users to save their settings based on their connections.

Az első jelző itt talán a nyugodtság volt, ami eszünkbe jutott. Elkezdtük hallani a rendszert Sevdaliza Joanna című számával és nagyon tetszett, tényleg nagyon. Aztán a Comfortably Numb alatt borsózott a hátunk, de ez a szám mindig ezt váltja ki belőlünk.. Majd Avishai Cohen magasságában olyan volt, mintha valami elpattant volna és onnantól nem akartuk kikapcsolni, hangosítani, halkítani a zenét, csak hagytuk folyni a listát, amíg le nem járt. A végén a Beat It azért kicsit felébresztett. A környezet nem ideális, de a zenén ez nem hallatszott. MX5’s screen can be set to automatically close and only display the current input without any operation for 30 seconds. Let us know how the PA3s + DX3 Pro+ works out for you. I can tell you that the PA5 is dead silent, so that's an option too, although the cosmetic match will not be as nice. MX5 supports Auto On/Off function in all inputs. When a valid signal is detected, it will be turned on immediately. When the valid signal is lost, it will automatically shut down (Turn to standby mode) within a specific time. For analog signals of different strengths, MX5 provides three options of sensitivity to ensure that the signal can be accurately detected.With the help of Infineon Merus Class D amplifer, MX5 can output 70Wx2 under 4 ohm load 10% distortion, 55W x2 under 4-ohm load 1% distortion. Under 8-ohm load, 10% distortion can output 42Wx2, and 1% distortion can output 35W x2, which can meet daily use. For analog signals of different strengths, MX5 provides three options of sensitivity to ensure that the signal can be accurately detected, which greatly expand the scope of application.

MX5 built-in ESS SABRE HIFI DAC, with XMOS XU208 & Qualcomm QCC3031, bring excellent performance to the MX5 with USB, optical fiber, coaxial, Bluetooth input. This allows the MX5 to easily access a variety of audio sources including computers, set-top boxes, CD players, mobile phones, tablets, etc. For desktop speakers, I have some very old Krix Brix (yes the originals from the 1990s) and this little box powers them in a a way I have never heard. My ears are only a metre away but at 70/100 (high gain) the bass is rich, the mids all there and the high end (well my 54 year old high end anyway) seems good to me. And these are really small, old speakers. The NFCA circuit in MX5 is optimized for better performance, giving the ultra-low noise and distortion performance. It could easily pair with high sensitivity lEMs and power-hungry high impedance headphones nicely. The built-in headphone amp allows you to enjoy music by yourself without disturbing others. A fejhallgatót (a Toppinghoz hasonlóan) a Muzix Audio bocsátotta rendelkezésünkre. Ez egy Ultrasone Pro900i volt, ami talán a legjobb füles, ami eddig a kezeink közt volt. A fülünkön már volt jobb, mert hallgattuk már a Sennheiser Orpheust is egy kiállításon, de igazából azt a fejünkre is a cég képviselője helyezte, így tényleg nem volt a kezünk közt.Az állatorvosok szerint Bobi, a nemrégiben elhunyt alentejo masztiff nem lehetett 31 éves 2023.10.30. However I'm a bit confused when you're talking about the speaker outputs. What exactly are you trying to connect to? If it's active speakers or other amplifiers, then the EX5 would make more sense, since it has the pre-amp RCA output (although EX5 doesn't have RCA source inputs like the MX5 has, if that's a consideration). In the past I've used normal speaker terminals such as what the MX5 has to pass a line-level signal to a subwoofer via an adapter, but that was when I had normal speakers cables connected at the same time. I don't think it'd work on its own without an actual speaker load, but I could be wrong. In any case simultaneous connection with passive speakers doesn't sound like what you're trying to achieve. Users can adjust the Bass and Treble frequency response with the Topping MX5 as it has a built-in EQ function. Both the Treble and Bass regions can be adjusted within a range of -10dB to +10dB. Hifi rovatunkban egy ideje komolyabban fogalakozni kezdtünk a mérettakarékos hifi komponensekkel, DAC-okkal, fejhallgató erősítőkkel és társaikkal. Mostani tesztünkben egy minden-az-egyben eszközzel fogunk foglalkozni, ez pedig a Topping MX5 lesz. Mi minden az egyben?