Triton 450W Oscillating Spindle & Belt Sander TSPST450 (977604),Orange

Product Information

Hooking the dust collection port to the shop extractor showed a reasonable extraction level, but one that loses a lot of power where it counts; the port pulls air from the entirety of the open recessed area in the top plate, slowing down air velocity and resulting in poor extraction even with the cover plates. Dust in both spindle and belt sanding modes was thrown around the unit with perhaps half being taken away. In comparison to the TSPS450 spindle-only sander, this is a drastic step down in performance. The Triton TSPST450 oscillating belt and bobbin sander is a 2-in-1 machine. It can work as a belt or spindle sander, and switching from one mode to another is as easy as ABC. It boasts of a dynamic 450-Watt motor, hence, you should expect ultimate effectiveness at all times. You can tilt the table up to 45 degrees so as to get maximum precision of your jobs, especially when sanding edges. Also a badged import product, Triton recently introduced the TSPST450 which has almost the exact same specifications as its sibling. Add onto this the tiltable worktop and belt sanding unit it seems a very attractive alternative for relatively little additional cost.

Our experiences with the Triton TSPS450 oscillating spindle sander were somewhat mixed. It was our opinion that it represented a great tool for the money in spite of it being a simple badged Far Eastern import with cheesy design and less than durable build quality. For the home gamer it would be a great addition to a workshop, as long as it didn't crap out within a few hours like ours did. With its no-load speed standing at 2000 revolutions per minute, you can be sure of getting the most satisfactory result. You will like its oscillating action, which stands at 58 oscillations per minute so that there will be reduction in friction during operations. This machine is compactly designed so as to enhance space-saving storage.

This 230-volt bobbin sander from Draper has a dynamic motor of 370 Watts, hence, you can be sure of getting outstanding effectiveness. It is bench-mounted and comes with a cast iron table so that you will be able to get the most satisfactory results. It has a stand so that you can sand without going through too much stress.

This 2-in-1 sander from Sealey is your best bet if you are looking for a product that is reliable. It has the functionality for both bobbin and belt sander, meaning that you will certainly get value for your money. It has an extraction port, which is very vital for making your working area dirt-free. Hot on the heels of our review for the Triton TSPS450 oscillating spindle sander, we're taking a look at its cousin which "offers" similar capabilities "in addition" to belt sanding.... In its spindle sander configuration, the unit performs similarly to the TSPS450 and sounds just as loud! Without taking a peek under the hood, it is expected that the motor configuration is more or less the same, ie. a dual belt drive running the spindle and oscillation. These belts work by driving a pair of plastic rotary cams; one connected to the main spindle's rotation and the geared at a marginally-different speed to the first to actuate the vertical spindle motion via a cammed profile. Whilst not idea from a design standpoint, it is to be expected at this price range.

The Triton brand distributes high-quality power tools as well as workshop or stationary wood machines that are sometimes similar to other brands such as this oscillating cylinder sander, similar to the Scheppach OSM100. Here the spare parts for Triton oscillating sander TSPS450 and TSPST450!

The spindle has a maximum load speed of 2000 revolutions per minute while the belt boasts of a speed of 480 metres per minute. There is an onboard-storage that makes it possible for you to keep your accessories without much hassle. You will like its dust extraction channel, which is situated under the table, and there are vented throat plates. A spindle sander makes the sanding of intricate curves on your woodworking jobs easier. It makes the job faster, and your hands will not experience too much fatigue. The Triton TSPST450 is a light duty benchtop machine driven by a 450W fixed-speed motor. The tabletop measures 430mm x 410mm (~17" x 16") and is made from two pieces of cast aluminium. The front half is capable of being angled up to 45° from flat, allowing angled sanding. The body of the machine is simple economical polypropylene, same as the TSPS450. The oscillating 13mm spindle can be fitted with one of five sanding sleeves; a 13mm sleeve fitted directly, or a 19mm, 26mm, 38mm or 51mm on rubber drums. The belt sanding unit provides a flat sanding face by simply dropping the unit into place and securing with a plastic thumbwheel. Power is managed by a single magnetic safety switch which prevents the units re-engaging should mains power be lost and re-established without manually disengaging the unit. Dust collection is provided through a single 38mm side-mounted port. All accessories and parts can be stowed around the body of the sanding unit for easy access.Last but not least in this review is this machine from Rutlands. It has a 450-Watt motor so that there can be flawless effectiveness at all times. You will like the quiet operation of the motor, making it possible for you to enjoy every time you spend on your sanding tasks.

Also, this machine boasts of both oscillating and rotating motions so that there can be a flawless finish of your jobs. Its table is made of heavy-duty cast iron so that there can be maximum durability, accuracy, and stability. The table is very large so as to provide adequate support for your materials. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. Also, the oscillation of this machine makes sanding to be faster and it does not allow your workpiece to burn. You can tilt the front table up to 48 degrees so that it will be possible for you to engage in bevel sanding. The table comes with indents at well-known angles such as 0, 15, 22.5, 30 and 45 degrees so that you can be more flexible with your work. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. x sanding sleeves from 13 - 51mm diameter and 100 x 610mm belt sander provide maximum versatility and work rate with both intricate, shaped plus standard workpieces.Besides, this machine is specially designed to make it possible for you to match the sleeve size to meet every project’s requirements. It is powered by a 450-Watt motor, hence, you should be able to experience optimum performance. It is compactly designed so that you won’t have problems storing it whenever you want to do so. Choosing the right spindle sander is dependent on your budget and preferences. With the proper use of this guide, it is our belief that you will be able to make a flawless decision based on the information at your disposal. The Scheppach OSM100 comes with plush attributes that will enhance your sanding jobs. It boasts of a 450-watt motor so that there won’t be issues with outstanding performance. That is why you can use it to sand wide and deep workpieces, narrow inner curves, front edges and so on. With its speed standing at 581 OPM, you can be sure of getting your sanding jobs done without much hassle. Triton TSPS450 oscillating spindle sander is an ideal choice for you if you desire outstanding performance in all your woodworking tasks. It comes with a cast iron table measuring 370 by 295 millimetres so that you can have enough space for placing your wood. You will like its oscillating action, which guarantees perfect movement of the drum up and down so that there can be reduced static friction. Triton TSPST450 Oscillating Spindle/Belt Sander by Carl Maltby is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. You are free to: