Cooler Master Hyper 212 Evo CPU Cooler (RR-212E-20PK-R2), 120mm PWM Fan, Aluminum Fins, 4 Copper Direct Contact Heat Pipes for AMD Ryzen/Intel

Product Information

You should also get a program that watches the power draw. It should be 200W+. It might even be 225W. Personally I use Core Temp for that. HWInfo64 is used for real-time core temperature readout, thermal throttling alerts, motherboard power consumption, CPU speed and logging of data, while a CrystalFontz CFA-633-TMI-KU is used to monitor and later average both ambient room (two probes) and motherboard voltage regulator heatsink (two probes). Comparison Coolers Johnpombrio said:OK Phazz, here is the result using Prime. the temps are actually lower. What test do you WANT me to run?

Hyper 212 RGB Black Edition | Cooler Master UK Hyper 212 RGB Black Edition | Cooler Master UK

What's more likely is that the temps in your system aren't being reported correctly and you're shortening the lifespan of your hardware.The graph below shows the average temperature over a 20 minute stress test using Prime95 with the Blend preset. We found this test to be the best at visually displaying the performance of the coolers as it has the highest range of results. LGA1200, LGA2066, LGA2011-V3, LGA2011, LGA1151, LGA1150, LGA1155, LGA1156, LGA1366, LGA775, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1 EDIT: Oh and if you really wanna know which test to run. Prime95 "Small FFT's" is the one to use to push the CPU. If you use "Blend" you should run it till it's gone through all the tests to make sure. Exactly how long that takes I don't remember, but it's more than 30 mins. I would have liked to seen either the 212 evo or 212+ to see if it has any benefit over the originals. After all we are seeing differences in those two 212 versions. I really dont care much about the color, leds, and ect but if it preforms better then let use see. Our Flir One Pro thermal imaging camera shows some noticeable differences in heat soak throughout the cooling tower itself between 50% and 100%, which is to be expected. There is also a slightly lower thermal signature in the adjacent regions at full speed, which indicates the added benefit of improved airflow.

Hyper 212 V2 CPU Air Cooler | Cooler Master Hyper 212 V2 CPU Air Cooler | Cooler Master

Corsair Commander Pro, 100%/50% PWM Speed profiles (liquid cooling pump always @100%, if applicable) LGA2066, LGA2011-v3, LGA2011, LGA1366, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1Both the 5-blade Silencio and 9-blade RGB fans have a rather conservative design considering some of the currentexotic fan and lighting trends. The 9-blade SF120R RGB fan sports narrow, elongated blades, while the 5-blade FP120 features wide, sweeping blades. Data comparisons are based on data collected from testing performed on our new Intel i9-10850K system, including re-visiting many previously covered products which were originally covered on the prior testing platform which pivoted around an i7-5930k (4.20ghz @1.20v). Well-balanced cooling performance provides fin optimizations with perfect balance between high and low speed operations. LGA2066, LGA2011-v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

Cooler Master Hyper 212 Evo v2 Review: Reviving a Budget Classic

The performance of the Hyper 212 EVO is where it really shines, and is the reason why it is regarded as one of the best air coolers for the money. We have used various versions of the 212 for years so the results were not surprising at all. Test System Specs You'll be throttling in any stress test with a Hyper 212 EVO on a 9900k. Even if you're running max fan speed. A compact size RGB LED controller that allows you to easily customize your RGB devices without the need for either an RGB capable motherboard or software.

Corsair Dominator Titanium First Edition DDR5-6600 C32 2x32GB Review: Abundant Capacity And Performance All tests were conducted in a temperature controlled room at a constant 21°C. All fan speeds were set to the BIOS default setting of "Normal", which worked perfectly as none of the coolers we tested had excessive noise levels. OK Phazz, here is the result using Prime. the temps are actually lower. What test do you WANT me to run? LGA1700, LGA1200, LGA2066, LGA2011-v3, LGA2011, LGA1156, LGA1155, LGA1151, LGA1150, AM5, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1 I think more interesting comparisons would be with the Windale 4 and the Gammaxx 400. These are the value choices.