ComDent - Finger Ring Cutter

Product Information

Use extreme caution when using bolt cutters to remove a ring, as you can easily cut the finger with either the bolt cutters or the crushed edge of the ring band. Some rings made out of hard but brittle material (eg, ceramic, tungsten) can be broken into pieces by applying pressure with vice grips by slowly tightening the tension screw, which closes the grips tighter until the ring breaks. Because pieces of the ring may shatter and become projectile, eye protection is advised for the patient and person performing the procedure. Designed, developed and patented by A-Z Tec Medical Limited, the GEM II Ring Cutter was the first battery powered ring cutter Easy Jump Ring Cutting, New Jewelry Making Tool, Patenting Pending Innovative Design by Elkhorn Silver™, Perfect Gift for Jewelry Making

The GEM II Ring Cutter is designed to be used with two different types of ring cutting disc. The A-Z 223 Diamond Cutting Disc is for use on hard Kalkan A, Kose O, Tas M, Meric G: Review of techniques for the removal of trapped rings on fingers with a proposed new algorithm. Am J Emerg Med 31(11):1605–1611, 2013. doi: 10.1016/j.ajem.2013.06.009 This article was co-authored by Kennon Young and by wikiHow staff writer, Megaera Lorenz, PhD. Kennon Young is a Master Gemologist Appraiser and the Owner of Vermont Gemological Laboratory in Burlington, Vermont. With over 20 years of experience in the industry, Kennon and his team specialize in handmade engagement rings, wedding bands, and custom jewelry. He attended the Revere Academy of Jewelry Arts, the Gemological Institute of America, and the Rhode Island School of Design Extension. He is a Jewelers of America (JA) Certified Bench Jeweler Technician and received the highest credential in the jewelry appraisal industry, the ASA Master Gemologist Appraiser, in 2016. For rings made of hard material, one person can pull on each side of the ring to open it; each can use a paper clip. Unlike the manual ring cutter the Gem II ring cutter's uniquely designed cutting disc guide component allows a ring or series of rings (up to 20mm wide and 5mm deep) to be cut through in one single uninteruppted operation

Customer reviews

A single hand operated unit which is used in Accident & Emergency Departments, Minor Injury Units and Fire and Rescue Sea Otter cookie cutter, Otterly cute, Happy otters biscuit, Kids party ideas, Marine mammals animals DIY wedding favors, Gift gifts present

as Tungsten, Titanium and Stainless Steel. For softer metal rings such as gold, silver, brass and copper there is the Remind the patient to remove all rings before finger edema develops and is extensive enough to cause pain or vascular compromise if there is ever risk of a finger injury. Slide the manual ring cutter's small hook (guard) under the ring to position the saw-toothed wheel that cuts the metal. Unlike the manual ring cutter the Gem II ring cutter's uniquely designed cutting disc guide component allows a ring or series of

Gardiner CL, Handyside K, Mazzillo J, et al: A comparison of two techniques for tungsten carbide ring removal. Am J Emerg Med 31(10):1516–9, 2013. doi: 10.1016/j.ajem.2013.07.027 Use a rotary tool with a mini saw attachment for soft metal rings. A small steel circular saw blade can be used to remove rings made of gold, silver, or platinum. This may also work for titanium rings, but it may take several minutes to make the cut successfully. Diamond blades are more effective for harder materials, such as titanium or stainless steel. [8] X Research source Spread apart the cut ends of the ring with a large hemostat or another tool (eg, pliers) and remove it. Reduce swelling with cold water. Sometimes exposure to cold temperatures can reduce swelling in your finger enough to allow a ring to slip off. Fill a bowl with cold water and soak your hand in it for a few minutes, then try to remove the ring. [12] X Research source For rings made of hard material (eg, steel, cobalt, titanium), use a powered ring-cutting saw if available. If unavailable, a bolt cutter can also be used. Use eye protection for the patient and person performing the procedure because the pieces may shear off and become projectile.