Aico EI3024

Product Information

Most of our alarms have a 10-year life, after which they should be replaced to ensure you carry on getting the best protection. There is likely to be Carbon Monoxide present. Turn off any gas appliances, open windows and doors and leave the property. If the alarm contains AudioLINK – Once the alarm has stopped activating and it is safe to enter the property extract a report to identify the details of the incident. If you are using an Alarm Controller Ei450 this will continue for as long as you hold down the ‘Test’ button.

Ei3024 Multi Sensor Fire Alarm • EI Electronics Ei3024 Multi Sensor Fire Alarm • EI Electronics

Never ignore a beeping alarm, as it is a warning sign of either a danger in the home or that an alarm needs maintenance. If it is a regular single beep (approximately once every minute), then the battery may be running low, and you may need to change the battery in the alarm. This is relevant for the 140RC Series alarms. If you have more than one alarm in the property and they are interconnected, this will also trigger all the other alarms in the property.

Product Downloads

Above this is the ‘Replace By’ date, but note that the date on the label shows the maximum life of the alarm and alarms should always be replaced before their life is up.

Ei3024 Mains Multi-Sensor Heat and Smoke + Lithium Back Up Ei3024 Mains Multi-Sensor Heat and Smoke + Lithium Back Up

Find the alarm with the red light rapidly flashing. Press its ‘Hush’ button to silence. If that does not silence it, clean the alarm using a vacuum. Wait for 10 minutes and the issue should be resolved. Insert a flat headed screwdriver into the removal slot of the alarm. This is marked with an arrow. Make sure you keep the screwdriver horizontal (i.e. parallel to the ceiling). The Ei3024 contains AudioLINK technology, which allows you to extract real time data from the alarm directly to a smartphone or tablet via the AudioLINK App. The memory feature allows an alarm that has previously activated to be easily identified (through the red flashing LED). The Ei3024 self tests its sensors, battery and internal circuitry every 48 seconds. Any fault condition found will be indicated by a combination of yellow LED flashes and/or audible beeps. This alarm is a multi-sensor fire alarm - it contains both optical and heat sensors to provide a total fire coverage. The intelligent software it has installed allows it to detect all fire types (TF1 to TF6 & TF8) surpassing traditional single sensor Alarms. In addition, the chamber design, integrated insect screen and unique dust compensation algorithm reduce the risk of false alarms.Performing a regular test is a vital part of ensuring continued fire and carbon monoxide detection. Alarms should be tested monthly to ensure everything is working correctly.