Elgato Cam Link Pro, Internal Camera Capture Card with 4 HDMI inputs, Stream and Record 1080p60 or 4K30 for Video Conferencing, Teaching, Streaming, Broadcasting on OBS, Zoom, Teams with Multicam, PC

Product Information

I've tried deleting and recreating the video source several times (with and without restarting OBS inbetween) and unfortunately, that didn't seem to help. For good measure, I've also opened up the video source properties window (same as the screen shot in my original post) that shows a resolution of 4k30 (circled for convenience), as well as the camlink pro input device properties (same as in my first post), which once again shows that the input is receiving a 4k30 signal. A powerful video mixer engineered for multicam production, Elgato Cam Link Pro equips you to capture four HDMI signals from cameras, computers, laptops, tablets and more. In OBS even if I have canvas and output set to 3840x2160, and add the source capture video configuration at 3840x2160, OBS seems to see it as a 1920x1080 device. As I mentioned in my last post, " 3) I am definitely getting a 3840x2160 output everywhere other than OBS.

Because i think macbook lower resolution because card send info about hdmi resolution and system set max resolution at 60fps. What I want is for only the top-left 1920x1080 pixels of the 4k source to take up the entire canvas. Revolutionize your virtual presentations, ace your digital creative pitches, and engage your students using a multitude of educational media. My problem is that my 4k input is being downscaled (apparently by OBS) to 1080p, so I've got nothing to crop, as I'd have to stretch a (now) 1080p signal up to 4k, then crop, resulting in horrible quality.If your item has stopped functioning correctly we offer a 12 month warranty on goods, valid from the date of purchase. The project is set for 30FPS and the Cam Link Pro can only do 4k at 30FPS, so it should be able to get a 30FPS 4k mode from the camera as other software do. Pic- ture in Picture, Side by Side, Triple, or Quad — choose your Multiview layout in Elgato 4K Capture Utility, and switch layouts on the fly with Elgato Stream Deck. If you need help with products purchased from Micro Center, please contact one of our knowledgeable tech support reps using the online chat button below, or visit our Tech Support page for additional options and helpful information. I wonder if the problem is that OBS is trying to connect to the source at a higher FPS then it should be.

Grabber (like Cam Link Pro) is passive device, your source must correct introduce list of resolution. And going back to beginning if you see in OBS (logs) this resolution 1920x1080 and FPS 60 - your source send 1920x1080p60. Using the software may require the use of a computer or other device that must meet minimum system requirements. We're making continuous improvements to the compatibility checker and would love to hear your feedback! Cam Link Pro after connect cable, send list of resolution to sender (source of video), then decided which resolution send, if you block on sender resolution - receiver show black screen or communique 'You are after range' if resolution is not supported or show picture if supported.Ask your Support Technician about additional options available through our exclusive Priority Care Program. Finally, as shown in the attached image of the Camlink Pro Device Properties in my first post, its video is "3840x2160p" with a refresh rate of "30fps" This is why I believe it is something in OBS. I have a Camlink 4k Pro PCIe card, with 2 1080p inputs (face cam and secondary cam), and a 4k input (MacbookPro outputting 3840x2160p). No no no - you don't upload screenshot with configuration of video source with information about resolution. You keep going back to "your source sends 1920x1080p60" completely ignoring the fact that both dcmouser and myself have CONFIRMED (and in my case I have shown evidence here) that 1) our video source is sending 4k30, and 2) that in every other windows capture software (at least that I have access to), using the exact same video source, and exact same Camlink Pro PCIe card, yield a 4k30 capture.

To the right, the smaller version, is the FULL SCALE source I am getting in OBS, at the exact same time, with the exact same 4k30 output.Stream or record in 4K or 1080p60 Full HD, get independent source control in broadcast software, and add four cameras to video conferencing apps with Elgato Multiview. The problem seems to be that when OBS connects to the Cam Link Pro, no matter how the "Configure Video" options are set, and no matter how the custom resolution is set (3840x2160 in my case), OBS still connects to it at 1920x1080. I can use the Elgato capture software, and get a full 4k30 signal, and the windows camera app shows a full 4k30 (and yes, I can specify 30hz as the output for my MBP). Stream or record in 4K or 1080p60 Full HD, control video feeds separately in broadcast software, and add four cameras to video streaming apps.

I do think the Camlink Pro only supports 4k30 when using NV12, and that the issue was created by OBS defaulting to YUY2 or something which made the source 1080. I've gone through and tried every port, and none of them seem to do 4Kp30 to OBS (again, they ALL do 4Kp30 to every other capture software I have). Cam Link Pro equips you to capture four HDMI signals from cameras, computers, laptops, tablets, and more.

Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital (UK) PLC, authorised and regulated by the Financial Conduct Authority. The lesser usb3-based CamLink 4k does work at 4k -- though obviously the 4-hdmi pcie card would be preferable. What it is receiving is my Macbook Pro's screen, which I have also brought up the resolution being output- 4k30. To handle the full 3840x2160 you should set your OBS Base resolution to that, and the scaled output size to 1080p then. Little more card can change resolution from higher to lower but not FPS or interpolation to progressive mode.